Catalog HONEYWELL

POWER SUPPLIES 16 AMP COATED(EX 51506303-200)

POWER ADAPTER

PM POWER SUPPLY

AIR VENT: EARD6 VENTILATION DAMPER. DAMPER IS NORMALLY CLOSED, POWER OPEN, SPRING RETURN. USED WITH W8150 FOR FRESH AIR VENTILATION.

BONNET ADAPTER KIT: 32004629-001 BONNET ADAPTER KIT TO ADAPT (LANDIS/ POWERS) FLOWRITE 599 1/2-3 IN GLOBE VALVE,USE W/Q5020A OR B-REQUIRED SEE PROD DATA 63-2552

BURNER CONTROL: RM7896D1027 BURNER CONTROL 120V, 50/60 HZ. SWITCH CHECK. 15 SEC POSTPURGE. PURGE LED INSTEAD OF STANDARD FLAME LED. POWER LED BLINKS ALARM CODE ON LOCKOUT.

CONTACT: R8239A1052 TRADELINE FAN CENTER 120V PRIMARY, 24V SECON- DARY W/PLUG-IN SPDT RELAY 1 N.0. AND 1 N.C. POWER CONTACTS

CONTACT: R8239B1043 SUPER TRADELINE. DPDT RELAY WITH 2 N.O. AND 2 N.C. POWER CONTACTS.

COVER PLATE: T8775A1009 THERMOSTAT. HEAT ONLY APPLICATIONS. NON-PROGRAMMABLE. R & W TERMINALS. POWER STEALING. BACKLIT DISPLAY. PREMIER WHITE.• ATTRACTIVE STYLING COMPLEMENTS ANY DECOR. • LARGE EASY-TO-READ DISPLAY. • TEMPERATURE READING IS EASILY SEEN FROM A DISTANCE. • BACKLIT DISPLAY. • ON-DEMAND BACKLIGHTING MAKES IT EASY TO READ DISPLAY IN A DARK ROOM OR HALLWAY. • NO BATTERIES REQUIRED. • TEMPERATURE SETTING IS HELD PERMANENTLY IN MEMORY IN EVENT OF A POWER FAILURE. • POWERED THROUGH HEATING-COOLING SYSTEM CONTROLS. • SYSTEM AND FAN SWITCHES ON T8775C MODEL. • MANUAL CHANGEOVER FROM HEAT TO COOL ON T8775C MODEL. • EASY INSTALLATION, SET UP AND 5-MINUTE COMPRESSOR BYPASS SAVES TIME AND INCREASES INSTALLER PRODUCTIVITY. • EASILY CONFIGURABLE BY USE OF DIP SWITCHES. • F OR C TEMPERATURE DISPLAY. • SELECTABLE HEATING CYCLE RATES (1, 3, 6, 9 CPH) FOR A VARIETY OF APPLICATIONS. •

CURRENT SENSOR: CTS-20-250-AVG-001 SOLID CORE LOOP POWERED CURRENT SENSOR, 4-20MA OUTPUT, 0-100/0-200/0-250 AMPS

DAMPER MOTOR: M7215A1008 DAMPER MOTORS BY HONEYWELL PROVIDE 25 LB-IN. TORQUE WITH SPRING RETURN AND 2-10 VDC MODULATING CONTROL OF ECONOMIZER SYSTEMS, VENTILATION DAMPERS AND COMBUSTION AIR DAMPERS USED IN RESIDENTIAL OR COMMERCIAL HVAC EQUIPMENT. • SYNCHRONOUS MOTOR. • QUIET, HIGH EFFICIENCY DRIVE MOTOR. • SPRING RETURNS MOTOR SHAFT TO NORMAL POSITION ON POWER INTERRUPTION. • HIGH IMPACT, GLASS-FIBER REINFORCED PLASTIC CASE IS RUGGED, LIGHTWEIGHT AND CORROSION RESISTANT. • USES Q298B LINKAGE.

INDUSTRIAL FLUID POWER ACTUATOR: COMBUSTION VALVE ACTUATOR

MOTORIZED ZONE VALVE: V8043E1004 TRADELINE. 1/2" SWEAT LOW VOLTAGE MOTORIZED ZONE VALVE. TWO-WAY ON-OFF LOW VOLTAGE VALVES BY HONEYWELL CONSIST OF AN ACTUATOR AND VALVE ASSEMBLY FOR CONTROLLING FLOW OF HOT WATER. MANUAL OPENER (ON ALL MODELS, EXCEPT STRAIGHT-THROUGH, NORMALLY OPEN VALVES) FOR VALVE OPERATION ON POWER FAILURE; VALVE RETURNS TO AUTOMATIC POSITION WHEN POWER IS RESTORED.

MOTORIZED ZONE VALVE: V8043E1020 1" SWEAT 24V LOW VOLTAGE TWO-WAY ON-OFF MOTORIZED ZONE VALVE BY HONEYWELL CONSIST OF AN ACTUATOR AND VALVE ASSEMBLY FOR CONTROLLING FLOW OF HOT WATER. MANUAL OPENER (ON ALL MODELS, EXCEPT STRAIGHT-THROUGH, NORMALLY OPEN VALVES) FOR VALVE OPERATION ON POWER FAILURE; VALVE RETURNS TO AUTOMATIC POSITION WHEN POWER IS RESTORED.

POWER SUPPLY: RP7517A1009 ELECTRONIC - PNEUMATIC TRANSDUCER POWERED BY CONTROL SIGNAL, 30 INCH LEAD WIRE, WITH COVER, WITHOUT INTERNAL POWER SUPPLY, 2 WIRE

POWER TUBE: POWER TUBE

POWERHEAD ASSEMBLY: 40003916-021 V8043A POWERHEAD ASSEMBLY, 2 WAY, 18" LEADS ON MANUAL OPENER END. 24/60.

POWERHEAD ASSEMBLY: 40003916-023 V4043A POWERHEAD ASSEMBLY, 2 WAY, 18" LEADS ON MANUAL OPENER END. 240/50.

POWERHEAD ASSEMBLY: 40003916-024 V4043A POWERHEAD ASSEMBLY, 2 WAY, 18" LEADS ON MANUAL OPENER END. 120/60.

POWERHEAD ASSEMBLY: 40003916-025 V8044E POWERHEAD ASSEMBLY, 3 WAY, SPST END SWITCH, 18" LEADS ON MANUAL OPENER END, W/HEYCO STRAIN RELIEF. 24/60.