
VLOC3 재고 있음
송신기
JAES 제품 총 424,268개 중 20개 표시

송신기

Flow detector; OPERATING MODE: ELECTROMECHANICAL; TYPE OF FLUIDS: AIR-H2; OPERATION RANGE: MAXIMUM 30000 Nm3/h; ELECTRICAL VOLTAGE: 220 VAC; FREQUENCY: 50 Hz; CONNECTION TYPE:…

DSG Model: VLP1000 (Part Number 999216) Manufacturer: ELECTRONICS INC. MF Part Number: 999216

Press for food industry

산업용 밸브

산업용 밸브

Manual pinch valve model GS.1 with the following characteristics: body in aluminum; EPDM sleeve; DN 100; PN 10; handwheel control; producer Galassi & Ortolani code VLPZ DN100 M

Manual pinch valve model GS.1 with the following characteristics: body in aluminum; EPDM sleeve; DN 150; PN 10; pulley control with chain for height 3.5 meters; manufacturer…

Manual pinch valve model GS.1 with the following characteristics: body in aluminum; EPDM sleeve; DN 32; PN 10; handwheel control; producer Galassi & Ortolani code VLPZ DN32 M

Manual pinch valve model GS.1 with the following characteristics: body in aluminum; EPDM sleeve; DN 50; PN 10; handwheel control; producer Galassi & Ortolani code VLPZ DN50 M

Manual pinch valve model GS.1 with the following characteristics: body in aluminum; EPDM sleeve; DN 65; PN 10; handwheel control; producer Galassi & Ortolani code VLPZ DN65 M

Manual pinch valve model GS.1 with the following characteristics: body in aluminum; EPDM sleeve; DN 80; PN 10; handwheel control; producer Galassi & Ortolani code VLPZ DN80 M

Pneumatic pinch valve model GS.5D with the following characteristics: double effect; aluminum body; EPDM sleeve; DN 100; PN 10; complete with flyer emergency, electromechanical…

Pneumatic pinch valve model GS.7 with the following characteristics: single effect; modulating, normally closed; aluminum body; EPDM sleeve; DN 30; PN 10; complete with emergency…

Pneumatic pinch valve model GS.7 with the following characteristics: single effect; normally closed; aluminum body; EPDM sleeve; DN 50; PN 10; complete with emergency handwheel,…

Pneumatic pinch valve model GS.5D with the following characteristics: double effect; aluminum body; EPDM sleeve; DN 65; PN 10; complete with flyer emergency, electromechanical…

PUMP with CHECK VALVE

펌프

V-GROOVED CONCENTRIC

BEARING TYPE: LOAD RUNNER; ROLLING TYPE: V-GROOVE ECCENTRIC STUD; INTERNAL DIAMETER: 1.312 "; OUTSIDE DIAMETER: 2.5 " ; WIDTH: 1.312 "; BEARING CHARACTERISTIC: STAINLESS
공급, 배송 시간 및 순정 교체 부품에 대한 정보
JAES를 통한 JAES 제품 소싱에 대해 알아야 할 모든 것.