IT
USA
DE
FR
ES
HE
IT
EN
USA
DE
ZH
ES
FR
PT
JP
RU
AR
KR
PL
RO
VN
TR
CS
HR
DA
FI
EL
NL
SR
SK
SV
HU
Hydrogen is the most simple chemical element on earth. As a matter of fact, atoms are composed by a single proton and a single electron. That’s why hydrogen is the first element in the periodic table.
Many think wrongly that hydrogen is an energy source, however it actually is an ENERGY VECTOR, because it can accumulate and provide that energy. For example, this process happens with fuel cells, which generate electricity using a hydrogen chemical reaction, producing water, heat and especially electricity as a by-product.
Even though hydrogen is the most abundant chemical substance in the universe, on our planet it can be produced using several internal resources such as fossil fuels like natural gas and coal, water, nuclear energy, and other renewable energy sources like biomass, wind, solar, geothermal and a wide array of processes.
Hydrogen can be produced:
• At or near the point of use;
• In larger facilities and then delivered to the point of use;
• In intermediate-size facilities located in close proximity (usually from 25 to 100 miles) to the point of use.
Hydrogen can be produced using several different processes.
THERMOCHEMICAL PROCESSES use heat and chemical reactions to release hydrogen from organic materials like fossil fuels and biomass.
Water can be split into hydrogen and oxygen by ELECTROLYTIC PROCESSES or by solar energy through PHOTOLYTIC PROCESSES.
Microorganisms such as bacteria and algae can produce hydrogen through BIOLOGICAL PROCESSES.
Let’s see the most common technologies for hydrogen production for each process.
THERMOCHEMICAL PROCESSES, as the name says, use heat and chemical reactions to extract hydrogen from molecular structure of natural gas, coal, biomass, and even water.
NATURAL GAS REFORMING is the most commonly used method for hydrogen production and the reaction is made with hydrocarbons like methane. Natural gas contains methane, that can be used to produce hydrogen by thermochemical processes, like STEAM REFORMING and PARTIAL OXIDATION.
In the STEAM REFORMING the methane and other hydrocarbons react with high-temperature steam under pressure and in the presence of a catalyst the reaction is accelerated.
The reaction products are hydrogen and carbon monoxide. The steam reforming process is endothermic, that means heat must be supplied to the process for the reaction to proceed, usually burning part of the methane.
STEAM REFORMING REACTION
In PARTIAL OXIDATION instead, methane reacts with a limited amount of oxygen, which is not sufficient to completely oxidize the hydrocarbons to carbon dioxide and water. The reaction products are always hydrogen and carbon monoxide, but, as you can see in chemical reactions, the partial oxidation produces less hydrogen with the same amount of fuel than is obtained by STEAM REFORMING. However PARTIAL OXIDATION OF METHANE is an exothermic process, which means it gives heat, that’s why it is much faster than STEAM REFORMING.
PARTIAL OXIDATION OF METHANE REACTION
Subsequently, in both processes carbon monoxide and steam react together with a catalyst in the so-called “WATER-GAS SHIFT REACTION” producing carbon dioxide and more hydrogen. In the final step of the process, called “pressure-swing adsorption”, carbon dioxide is removed, leaving pure hydrogen as a result.
Many think wrongly that hydrogen is an energy source, however it actually is an ENERGY VECTOR, because it can accumulate and provide that energy. For example, this process happens with fuel cells, which generate electricity using a hydrogen chemical reaction, producing water, heat and especially electricity as a by-product.
Even though hydrogen is the most abundant chemical substance in the universe, on our planet it can be produced using several internal resources such as fossil fuels like natural gas and coal, water, nuclear energy, and other renewable energy sources like biomass, wind, solar, geothermal and a wide array of processes.
Hydrogen can be produced:
• At or near the point of use;
• In larger facilities and then delivered to the point of use;
• In intermediate-size facilities located in close proximity (usually from 25 to 100 miles) to the point of use.
Hydrogen can be produced using several different processes.
THERMOCHEMICAL PROCESSES use heat and chemical reactions to release hydrogen from organic materials like fossil fuels and biomass.
Water can be split into hydrogen and oxygen by ELECTROLYTIC PROCESSES or by solar energy through PHOTOLYTIC PROCESSES.
Microorganisms such as bacteria and algae can produce hydrogen through BIOLOGICAL PROCESSES.
Let’s see the most common technologies for hydrogen production for each process.
THERMOCHEMICAL PROCESSES, as the name says, use heat and chemical reactions to extract hydrogen from molecular structure of natural gas, coal, biomass, and even water.
NATURAL GAS REFORMING is the most commonly used method for hydrogen production and the reaction is made with hydrocarbons like methane. Natural gas contains methane, that can be used to produce hydrogen by thermochemical processes, like STEAM REFORMING and PARTIAL OXIDATION.
In the STEAM REFORMING the methane and other hydrocarbons react with high-temperature steam under pressure and in the presence of a catalyst the reaction is accelerated.
The reaction products are hydrogen and carbon monoxide. The steam reforming process is endothermic, that means heat must be supplied to the process for the reaction to proceed, usually burning part of the methane.
STEAM REFORMING REACTION
In PARTIAL OXIDATION instead, methane reacts with a limited amount of oxygen, which is not sufficient to completely oxidize the hydrocarbons to carbon dioxide and water. The reaction products are always hydrogen and carbon monoxide, but, as you can see in chemical reactions, the partial oxidation produces less hydrogen with the same amount of fuel than is obtained by STEAM REFORMING. However PARTIAL OXIDATION OF METHANE is an exothermic process, which means it gives heat, that’s why it is much faster than STEAM REFORMING.
PARTIAL OXIDATION OF METHANE REACTION
Subsequently, in both processes carbon monoxide and steam react together with a catalyst in the so-called “WATER-GAS SHIFT REACTION” producing carbon dioxide and more hydrogen. In the final step of the process, called “pressure-swing adsorption”, carbon dioxide is removed, leaving pure hydrogen as a result.
WATER-GAS SHIFT REACTION
Let’s talk about ELECTROLYTIC PROCESSES, where electricity is used to make chemical reactions.
The most common process is ELECTROLYSIS OF WATER, where water is split into hydrogen and oxygen using electricity .
This could be a sustainable method for producing hydrogen, because there would be no green-house emission during renewable resources production.
In the ELECTROLYSIS OF WATER the electrolytic cell is made by an anode and a cathode and they are split by an electrolyte as in fuel cells, however the process taking place inside the latter is the exact opposite.
As you can see in this polymer electrolyte membrane (PEM) electrolyzer, the electrolyte is made of a strong plastic material.
Water reacts at the anode to form:
- oxygen;
- positively charged hydrogen ions (or protons), that move across the polymer electrolyte membrane up to the cathode;
- electrons, that flow through an external circuit to the cathode, like protons.
At the cathode, hydrogen ions combine with electrons from the external circuit to form hydrogen gas.
Differently from electrolytic processes using electricity, PHOTOLYTIC PROCESSES use sunlight energy to split water into hydrogen and oxygen. These processes offer long-term potential for sustainable hydrogen production with low environmental impact.
In a PHOTOELECTROCHEMICAL CELL (PEC) the semiconductors are similar to those used in photovoltaic solar electricity generation. They are immersed in a water-based electrolyte, where sunlight energizes the water-splitting process into hydrogen and oxygen like in the electrolysis of water.
Among BIOLOGICAL PROCESSES we can certainly include MICROBIAL CONVERSION OF BIOMASS, that take advantage of the ability of microorganisms to consume and digest biomass and release hydrogen.
But how does it actually work?
In fermentation-based systems, microorganisms such as bacteria break down organic matter to produce hydrogen. Microbial electrolysis cells (MECs) are devices that harness the energy and protons produced by microbes to produce hydrogen.
Let’s see how it works:
the electrolysis cell is composed by an anode and a cathode; the microbes in the anode consume organic matter such as acetic acid, producing electrons and protons. The electrons are passed to an electrode and travel through a wire to the electrode in the cathode section. With the help of a small added voltage, the protons are combined with the electrons to produce hydrogen gas. The so-called green hydrogen is produced from renewable resources.
Although a big disadvantage of producing green hydrogen is the huge amount of electricity from renewable resources, the great news is that prices of clean energy have decreased in recent years; on the other hand we’re facing an increase in prices of fossil fuels, a decrease in reserves and new solutions to fight climate change and air pollution that have been leading many countries to invest in this technology for sectors like transport, chemical industry and heavy industry.
In a world where 7 billion people are slave to the oil, do you think that green hydrogen will be the most effective clean alternative to fossil fuels? Share your opinion with us on the comments.
Let’s talk about ELECTROLYTIC PROCESSES, where electricity is used to make chemical reactions.
The most common process is ELECTROLYSIS OF WATER, where water is split into hydrogen and oxygen using electricity .
This could be a sustainable method for producing hydrogen, because there would be no green-house emission during renewable resources production.
In the ELECTROLYSIS OF WATER the electrolytic cell is made by an anode and a cathode and they are split by an electrolyte as in fuel cells, however the process taking place inside the latter is the exact opposite.
As you can see in this polymer electrolyte membrane (PEM) electrolyzer, the electrolyte is made of a strong plastic material.
Water reacts at the anode to form:
- oxygen;
- positively charged hydrogen ions (or protons), that move across the polymer electrolyte membrane up to the cathode;
- electrons, that flow through an external circuit to the cathode, like protons.
At the cathode, hydrogen ions combine with electrons from the external circuit to form hydrogen gas.
Differently from electrolytic processes using electricity, PHOTOLYTIC PROCESSES use sunlight energy to split water into hydrogen and oxygen. These processes offer long-term potential for sustainable hydrogen production with low environmental impact.
In a PHOTOELECTROCHEMICAL CELL (PEC) the semiconductors are similar to those used in photovoltaic solar electricity generation. They are immersed in a water-based electrolyte, where sunlight energizes the water-splitting process into hydrogen and oxygen like in the electrolysis of water.
Among BIOLOGICAL PROCESSES we can certainly include MICROBIAL CONVERSION OF BIOMASS, that take advantage of the ability of microorganisms to consume and digest biomass and release hydrogen.
But how does it actually work?
In fermentation-based systems, microorganisms such as bacteria break down organic matter to produce hydrogen. Microbial electrolysis cells (MECs) are devices that harness the energy and protons produced by microbes to produce hydrogen.
Let’s see how it works:
the electrolysis cell is composed by an anode and a cathode; the microbes in the anode consume organic matter such as acetic acid, producing electrons and protons. The electrons are passed to an electrode and travel through a wire to the electrode in the cathode section. With the help of a small added voltage, the protons are combined with the electrons to produce hydrogen gas. The so-called green hydrogen is produced from renewable resources.
Although a big disadvantage of producing green hydrogen is the huge amount of electricity from renewable resources, the great news is that prices of clean energy have decreased in recent years; on the other hand we’re facing an increase in prices of fossil fuels, a decrease in reserves and new solutions to fight climate change and air pollution that have been leading many countries to invest in this technology for sectors like transport, chemical industry and heavy industry.
In a world where 7 billion people are slave to the oil, do you think that green hydrogen will be the most effective clean alternative to fossil fuels? Share your opinion with us on the comments.