카탈로그 VOSS

METALOPLASTIC JOINT 1" BSP BANYO

MECHANICAL SEAL; TYPE: METALOPLASTIC; SHAFT DIAMETER: 1 "; BANYO CONNECTOR, BSP

SELECTOR DE CIRCUITO HID.VOSS WV-12L

O-RING; DIAMETRO INTERNO: 7.5 MM; GROSOR: 1.5 MM; MATERIAL: FLUOROCARBON O-FPM; DUREZA SHORE: 70 "A " ±5; (10S)

O-RING; DIAMETRO INTERNO: 4 MM; GROSOR: 1,5 MM; MATERIAL: VITON; DUREZA SHORE: 90; PARA PUNTA SOLDABLE 6MM

O-RING; DIAMETRO INTERNO: 6 MM; GROSOR: 1.5 MM; MATERIAL: VITON; DUREZA SHORE: 90; PARA PUNTAS SOLDABLES 8MM

O-RING; DIAMETRO INTERNO: 12 MM; GROSOR: 1,5 MM; MATERIAL: VITON; DUREZA SHORE: 90

O-RING; DIAMETRO INTERNO: 9 MM; GROSOR: 1.5 MM; MATERIAL: FLUOROCARBONO- FPM; DUREZA SHORE: 70 "A " ±5

O-RING; DIAMETRO INTERNO: 10 MM; GROSOR: 2 MM; MATERIAL: FLUOROCARBONO-F PM; DUREZA SHORE: 70 "A " ±5; (14S)

O-RING; INTERNAL DIAMETER: 9 MM; THICKNESS: 1.5MM; MATERIAL: FL UOROCARBON- FPM; SHORE HARDNESS: 70"A

CONNECTION; CONNECTION TYPE: ELBOW UNION; OUTER TUBE DIAMETER: 16 MM; THREAD TYPE: M24X1.5; MAXIMUM WORKING PRESSURE: 630 BAR; MATERIAL: CARBON STEEL; DIMENSIONS ACCORDING TO STANDARD: DIN 2353

O-RING; DIAMETRO INTERNO: 7.5 MM; GROSOR: 1.5 MM; MATERIAL: FLUOROCARBON O-FPM; DUREZA SHORE: 70

O-RING; INTERNAL DIAMETER: 9 MM; THICKNESS: 1.5MM; MATERIAL: FLUOROCARBON- FPM; SHORE HARDNESS: 70

O-RING; INTERNAL DIAMETER: 10 MM; THICKNESS: 2MM; MATERIAL: FLUOROCARBON-F PM; SHORE HARDNESS: 70

CHECK VALVE 30MM, "S" SERIES; PB 250; USE: DISCHARGE FROM 670-J2/J1. 4M PLANT DIRECT REDUCTION

O-RING; INTERNAL DIAMETER: 9 MM; THICKNESS: 1.5MM; MATERIAL: FLUOROCARBON- FPM; SHORE HARDNESS: 70 "A" ±5

O-RING; INTERNAL DIAMETER: 10 MM; THICKNESS: 2MM; MATERIAL: FLUOROCARBON-F PM; SHORE HARDNESS: 70 "A" ±5; (14S)

SHUT-OFF AND NON-RETURN VALVE; NOMINAL SIZE: 1/2 IN; MAXIMUM WORKING PRESSURE: 400 BAR; MOUNTING TYPE: THREADED; FLUIDS: ISO HM32 OIL MAXIMUM FLOW RATE: 100 L/MIN; NON-RETURN VALVE FLOW THREAD TO S16 G1/2" TUBE, 62 MM LENGTH, OPENING PRESSURE 1 BAR ; MODEL: 24-VNROTP-S16-G1/2E

ELBOW, TUBE: SIZE DN 10 MM, MATERIAL SS DIN WN 1.4571, RATING 630 BAR, STANDARD DIN 2353, FFT: TUBE CONNECTION: M22 X 1.5 MM, PIPE CONNECTION: BSP 1/2 IN; ADJUSTABLE; FORM DD; SERIES S; TUBE OD 14 MM; SURFACE FINISH BRIGHT; LENGTH FACE-TO-CENTRE 40 MM; LAYING LENGTH 22 MM; SPANNER WIDTH 27 MM, 19 MM; SEALING FACE OD 26 MM; PRE-INSTALLED WITH MALE STUD; STUD = FORM B; STANDARD DIN 2391/1, DIN 3852, DIN 3859, DIN 13