Katalóg AUMA

INDIRECTLY OPERATED MICROSWITCH ON A BUTTON, BY MEANS OF A RIGID LEVER CONTACTS 1NO- 1NC 250 VAC, 5 AMP, 250 VDC, 0.4 AMP. PROTECTION DEGREE IP66

MOTORIZED ACTUATOR SA 07.6, F10 ORDER NO: 13488777 COM NO: 2620MD29673 AM01.1 COM NO: 2620MA32097 TPA: 00R1BB-101-000 3P380V GS100.3 COM NO: 1920CG50054 TEMP: - 40.+80C IP68

GEARMOTOR

GEARMOTOR

ELECTRONIC ELECTRIC ACTUATOR; SPEED: 1400 RPM; POWER: 60 W ELECTRICAL VOLTAGE: 380 V; FREQUENCY: 50HZ; 1/4" TURN A MOVEMENT, IP68 PROTECTION; TORQUE IN BOTH DIRECTIONS 400/1200 NM; AMBIENT TEMPERATURE -40 +70° C; INTENSITY 0.6 AMP; S2 SERVICE 15 MINUTES; WITH F EEDBACK OF 4-20 MA FOR THE POSITION; 4 WIRE; POWER 0.06 KW, PART NUMBER: Z112.973, MUST INCLUDE UNMACHINED COUPLING FOR DRIVEN SHAFT

ACTUATOR

SA07.5-F10 MULTI-TURN ELECTRIC VALVE ACTUATOR

SA 07.6-F10 AUMA MULTI-TURN ACTUATORS

COMPACT ACTUATORS AD00063-4-0.20

ACTUATOR CONTROLS AUMATIC 00R1AA-0A1-000

ACTUATOR AD00 63-2/80

MULTI-TURN ACTUATOR TYPE: SA 14.6 VOLTAGE: 3PH/380V/50HZ DUTY: S2-15MIN SHORT-TIME DUTY, CLASSES A AND B ACC. TO EN 15714-2 ACTUATOR MOTOR CONTROLS AUMA MATIC TYPE: AM 02.1 PART-TURN GEARBOX TYPE GS 160.3 VALVE ATTACHMENT: F25-Y UN 11250 NM (C. REF. 13552184)

ELECTRONIC ELECTRIC ACTUATOR; SPEED: 60 RPM; POWER: 6.2 KW; VOLTAGE: 400 V; FREQUENCY: 50HZ; MULTI-TURN ELECTRIC ACTUATOR WITH VARIABLE SPEED SARV07.6 6-60 RPM, THREE-PHASE POWER SUPPLY 400-3-50 HZ, VERSION WITH CONTROL UNIT AND TEL AND NON-INTRUSIVE MICROPROCESSOR INVERTER ACV. PROFIBUS DP PROTOCOL THREE-PHASE SQUIRREL CAGE ELECTRIC MOTOR WITH HIGH STARTING TORQUE AND LOW INERTIA, TROPICALIZED CLASS "F" INSULATION. COMPLETE WITH BUILT-IN THERMOSTATIC PROTECTION MADE BY MEANS OF NR. 3 BIMETALLIC TABLETS, IN SERIES WITH EACH OTHER WITH THE TERMINALS ATTACHED TO THE TERMINAL BLOCK. POWER SUPPLY: 400V-50HZ THREE-PHASE. PERMITTED MAINS VOLTAGE TOLERANCE: ±10 % INTERCEPTION OR SCANNING SERVICE SA: CLASS A OR B ACCORDING TO UNI EN 15714-2, CONTINUOUS OPERATION PERIOD MAX. 15MIN. REGULATION SERVICE SAR = REGULATION EMERGENCY MANUAL CONTROL ACCORDING TO UNI EN 12570 WITH HANDWHEEL STOPPED AND ENGINE RUNNING; ENGAGEMENT BUTTON (ONE-HANDED ENGAGEMENT) AND AUTOMATIC DISENGAGEMENT DEVICE; WHERE RE