目录 JAES

电缆

线缆

线缆

线缆

线缆

线缆

CABLE GLAND; GALVANIZED STEEL 3/4"

ELECTRICAL CABLE WITH CONNECTOR; CABLE 4-PIN/PS INPUT M12X6M

线缆

FIXING CLAMP FOR LIFTING CABLE; CABLE DIAMETER: 3/16 IN; MATERIAL: GALVANIZED FORGED STEEL; STANDARD FF-C-450 TYPE 1 CLASS 1.

CYLINDRICAL BRUSH; DIAMETER: 26MM; BRUSH LENGTH: 45 MM; OVERALL LENGTH: 70 MM; MATERIAL: NYLON; WIRE GAUGE: 0.25 MM; CABLE SHAPE: RE TWISTED; HANDLE TYPE: TWISTED WIRE; DRAWING NUMBER: TM19-M-CUT01 -0012968;ØA=26;

POWER CABLE; NUMBER OF CONDUCTORS: 5; SECTION: 1 MM2; MAXIMUM THREAD DIAMETER: 0.21 MM; OUTER DIAMETER: 12.20 MM; TYPE: EC WOUNDED/PROTECTED; CONDUCTOR COVER: PVC; OUTER COATING: PVC; ELECTRICAL VOLTAGE: 450 V / 750 V; CABLE TEMPERATURE: 60 C; APPLICATION: MOBILE EQUIPMENT; DRIVER IDENTIFICATION: COLORS; SHIELDED CABLE FROHH2R-450/750V 5X1 MMP

2 FUME SAMPLING LINES. CHIMNEY LINE A (E1) = 30 MT CHIMNEY LINE B (E2) = 60 MT SAMPLING TUBE PTFE 6/4 HOT CALIBRATION TUBE UNDER SHEATH 6/4 DOUBLE PT100 A 3M 230V 80/90W/M WITHOUT THROUGH CABLES WITHOUT STAINLESS STEEL TERMINALS EXPANDED SILICONE INSULATION + SLEEVE ADDED PA12 CORRUGATED OUTSIDE BOTH HOT PIPES 2 MT OF PIPE EACH SIDE

GRAPHIC DISPLAY 320 X 240 PIXELS; EQUIPMENT BELONGING: GAS ANALYZERS ES ABB; THE PROVISION MUST BE INCLUDED: CONNECTOR FOR FLAT CABLE CODE 2323R-14A

START-UP ACCESSORIES FOR ADHESION TEST CHEMISTRUMENT STANDARD TEST PANEL 2" X 6" STAINLESS STEEL N PART TP-26 STANDARD TEST PANEL 3" X 9" STAINLESS STEEL N PART TP-39 EZ-DATA SOFTWARE PROGRAM FOR PC, USB DRIVE N PART EZ-DATA SOFTWARE LINK FOR AR-2000, INCLUDES USB CABLE N PART EZ-DATA LINK AR CUSTOM PANEL HOLDER SET FOR 9" LONG PANELS N PART R-AR-PNL HOLD CUST

POWER CABLE C14 TO C15 CONNECTIONS

M12-RJ45 CAT6A CABLE OF 10MTS.

ELECTRICAL CABLE WITH CONNECTOR; LENGTH: 3M; CONNECTORS: PYX IS

MOPE HORN MATERIAL: PLASTIC INCLUDES: 1 TECHNICAL SILKSCREEN PRINTING 1 POSITION 1 TONE BLUETOOTH HORN WITH RECHARGEABLE BATTERY. PLAYTIME OF APPROXIMATELY 6 HOURS. INTEGRATED CALL, VOLUME AND AUDIO PLAYBACK CONTROLS. SPLASH PROOF. INCLUDES USB CHARGING CABLE AND STRAP FOR EASY PORTABILITY

SHATTER - EQUIPMENT ACCORDING TO ASTM-A36 STANDARD FOR BREAKING TEST ACCORDING TO JIS 8711 STANDARD, INCLUDES: 1.0 HP GEARED MOTOR # 4 POLES # 60 HZ WITH BRAKE, SIDE PROTECTIONS, LIFTING SYSTEM THROUGH PULLEYS AND STEEL CABLE, SAMPLE BOX WITH DIMENSIONS OF 420 MM WIDTH, 560 MM LENGTH AND 200 MM HEIGHT, VOLUME OF 47 LITERS WITH INSTANTANEOUS OPENING (WHEN TOUCHING THE LIMIT SWITCH) IN THE POSITION 2 M HIGH CONSIDERING THE BASE OF THE SAMPLE BOX, ACCESS DOOR WITH INTERLOCK TO COMPLY WITH SAFETY REGULATIONS, LIMIT SWITCH AND POSITION SENSOR (2 M), BEARINGS AND PULLEYS FOR LIFTING THE SAMPLE BOX, BOTTOM WITH 1/2# PLATE, 2 FLOOR SIEVES (SIDES) FOR CLASSIFICATION WITH 2 10 MM AND 50 MM SIEVES AND ELECTRICAL PANEL WITH ON/OFF PUSHBUTTONS, SIGNAL LIGHTS, SAFETY RELAYS, SIGNALING, IDENTIFICATION, MAIN SWITCH, FREQUENCY INVERTER, HOUR METER, NC EMERGENCY BUTTON AND 3 M CABLE WITH SOCKET