קטלוג JAES

DINGO 48X4 / CODE: 001918 / MOTOR (HP): ENAR 3 / VIBRATOR HEAD DIAMETER (MM): 48 / VIBRATOR HEAD LENGTH (MM): 445 / FLEXIBLE LENGTH (M): 4 / CONNECTION (AMP): 2P+T - 16.

DINGO 40X4 / CODE: 001917 / MOTOR (HP): ENAR 3 / VIBRATOR HEAD DIAMETER (MM): 40 / VIBRATOR HEAD LENGTH (MM): 375 / FLEXIBLE LENGTH (M): 4 / CONNECTION (AMP): 2P+T - 16.

COMPLETE FILTER; FILTERING DEGREE: 150 MICRON; POLYPROPYLENE OR EXTRUDED CARTRIDGE 2.5 INCHES IN DIAMETER BY 40 INCHES LONG. FILTER 150 MIC 2.5X40

SHATTER - EQUIPMENT ACCORDING TO ASTM-A36 STANDARD FOR BREAKING TEST ACCORDING TO JIS 8711 STANDARD, INCLUDES: 1.0 HP GEARED MOTOR # 4 POLES # 60 HZ WITH BRAKE, SIDE PROTECTIONS, LIFTING SYSTEM THROUGH PULLEYS AND STEEL CABLE, SAMPLE BOX WITH DIMENSIONS OF 420 MM WIDTH, 560 MM LENGTH AND 200 MM HEIGHT, VOLUME OF 47 LITERS WITH INSTANTANEOUS OPENING (WHEN TOUCHING THE LIMIT SWITCH) IN THE POSITION 2 M HIGH CONSIDERING THE BASE OF THE SAMPLE BOX, ACCESS DOOR WITH INTERLOCK TO COMPLY WITH SAFETY REGULATIONS, LIMIT SWITCH AND POSITION SENSOR (2 M), BEARINGS AND PULLEYS FOR LIFTING THE SAMPLE BOX, BOTTOM WITH 1/2# PLATE, 2 FLOOR SIEVES (SIDES) FOR CLASSIFICATION WITH 2 10 MM AND 50 MM SIEVES AND ELECTRICAL PANEL WITH ON/OFF PUSHBUTTONS, SIGNAL LIGHTS, SAFETY RELAYS, SIGNALING, IDENTIFICATION, MAIN SWITCH, FREQUENCY INVERTER, HOUR METER, NC EMERGENCY BUTTON AND 3 M CABLE WITH SOCKET

DOUBLE LIP METAL ASSEMBLED REINFORCED WITHOUT SPRING; MATERIAL: NITRILE; SHAFT DIAMETER: 60 MM; HOUSING DIAMETER: 80 MM; THICKNESS: 8 MM; FLUIDS: OIL; FABRICATION NORM: ISO 6194 / DIN 3760; ANSI/B93.98M - 60X80X8-TYPE 6; 692593

CYLINDRICAL BRUSH; DIAMETER: 32MM; BRUSH LENGTH: 60 MM; OVERALL LENGTH: 90 MM; MATERIAL: ABRASIVE NYLON; WIRE GAUGE: 0.76 MM ; WIRE SHAPE: PLAIN STRANDED; HANDLE TYPE: NOT APPLICABLE; SINGLE TWISTED BRUSH TYPE DRAWING NUMBER: 2-31 002-MF-007 POS. 1

מעיין תעשייתי

DDA STIRRER ASD.1201.1,5R; COMPLETE WITH THREE-PHASE MOTOR, POWER: 1,5KW; CONTACTS:04 POLES; PROTECTION: IP55; VOLTAGE: 400V/50HZ 3F; COAXIAL REDUCER RATIO I=17.82; SHAFT: DIAMETER 60MM; IMPELLER: THREE-BLADE DIAM.1200MM; SHAFT AND IMPELLER COATING: NEOPRENE; SERIAL NR 07-1011-02

SINGLE LIP WITH METALIC INSERT WITH SPRING; MATERIAL: NITRILE; SHAFT DIAMETER: 10.125

גליל הידראולי

טבעת O

טבעת O

GASKET; INTERNAL DIAMETER: 358 MM; OUTSIDE DIAMET ER: 440 MM; THICKNESS/LENGTH: 4.8 MM; PROFILE TYPE: FLANGE; FLUIDS: GREA SE; MATERIAL: NEOPRENE REINFORCED; SHORE HARDNESS: 60 A; DRAWING NUMBER: V05128 REV. 01;V05113 REV. 06;34; PQF 4-6 STAND

אֶטֶם

טבעת O

טבעת O

PORTABLE TURBIDIMETER

MANOMETER 0-25 BAR FISH 1/H NP T

MANOMETER 0-16BAR

מאוורר