Katalógus HYDAC

REPAIR KIT FOR DF-160/240/280 FILTER ASSEMBLY

DETECTOR INDUCTIVO; TIPO DE CONEXION: CONECTOR; AGUA FLUIDO HIDRÁULICO; MEDICIÓN DE SATURACIÓN DE AGUA DE 0 A 100%; LÍQUIDO DE ACEITE MINERAL; E NCHUFE M12 (5 POLOS)

TEMPERATURE INDICATOR

ENFRIADOR; TIPO: DE ACEITE; DIMENSIONES: 706X736X600MM DIAMETRO DEL TUBO: 2 IN; NUMERO DE TUBOS: 2; RANGO DE PRESION: 16-21 BAR RANGO DE TEMPERATURA: -20 °C TO +40 °C

IPARI SZŰRŐ

PERMANENT GAUGING BLOCK FOR ACCUMULATOR NITROGEN PRESSURE MONITORING PERM GAUGING BLOCK-VER4-2300

GASKET KIT; FLUIDS: WATER; MATERIAL: BUN A; MAXIMUM OPERATING PRESSURE: 10 BAR; TEMPERATURE RANGE: 0 - 90 ºC; SEAL KIT FOR FILTER ELEMENT KS50-1 HYDAC DS-RF3-1-10-VF-N-0-01 MODEL : RF3-1 V.S

DEVICE FOR TRANSPORTATION OF ACCUMULATOR; MAXIMUM WORKING PRESSURE: 200 BAR; THREAD 7/8-14 UNF

DEVICE FOR TRANSPORTING ACCUMULATORS; MAXIMUM WORKING PRESSURE: 250 BAR; THREAD M50X1.4

RING; RING TYPE: RETAININGOUTSIDE DIAMETER: SNAP INSIDE DIAMETER: SNAPTHICKNESS: SNAPWEIGHT: 1.000KGCOMPLEMENTARY INFO: HYDAC P/N: 6114100 HYDAC MODEL CODE: SNAP RINGS RETAINING RING FOR CONTROL PLATE MANUFACTURER 1: HYDAC MANUF. PART NO. 1: 6114100

KIT: TYPE: HYDRAULIC MONITORING MINIMESS COUPLING 1620 FOR HYDRAULIC SYSTEM MONITORING HYDAC EXTENSION PART NO. FMS-FMM-P-CS-AS-SMU12-00/-60

INLINE FILTER TYPE: BN/HC-750-D-K-3-GW-2.X/-123-A5-B6 FLS PART NO:4135665 FOR COAL MILL BEARING LUBRICATION UNIT EQP.NO:461.LQ120 MANUFACTURER: HYDAC

FILTER CARTRIDGES

CLAMP FOR TUBING AND PIPING; TYPE: HEAVY; TUBE EXTERNAL DIAMETER: 2; WIDTH: 5.510; HEIGHT: 4.330; MATERIAL: POLYPROPYLENE; PIPING CLAMP 2; BOTTOM WELD PLATE, TWO CLAMP HALVES, TOP PLATE AND BOLTS

FLOW SWITCH- MECHANICAL SENSING RANGE: 2 TO 8 L/MIN BODY MATERIAL: STAINLESS STEEL ORIFICE AND SPRING MATERIAL: STAINLESS STEEL MECHANICAL CONNECTION: 3/4" NPT FEMALE THREAD MAXIMUM TEMPERATURE: 120°C VISCOSITY RANGE: 30 - 600 CST MAXIMUM PRESSURE: 300 BAR ELECTRICAL INFORMATION NUMBER OF CONTACTS: 1 CONTACT TYPE: NORMALLY OPEN ELECTRICAL CONNECTION: CONNECTOR DIN EN 175301-803 MAXIMUM VOLTAGE: 250V MAXIMUM CURRENT: 1.5 AMP HFS 2145-1S-0002-0008-7-S -1-000

DIFFERENTIAL PRESSURE MEASURING ADAPTER ADAPTER VD-1/4+1/4-W+W.0 /-00404337

PRESSURE SENSOR TYPE HDA4745-F 21-0400-00+FOR RECLAIMER AND S TACKER LUFTING SYSTEM HYDRAULI C STATION

BALL VALVE; NOMINAL SIZE: 1-1/2 IN; MOUNTING TYPE: FLANGED ACCORDING TO SAE J518; FLUIDS: AIR, WATER, OIL, GAS. MAXIMUM TEMPERATURE +225 °C DIAL MATERIAL: CARBON STEEL; BODY MATERIAL: FORGED CARBON STEEL; STEP TYPE: TOTAL; PRESSURE: 5800 PSI; HANDLE: STEEL OFFSET, SAE SPLIT FLAN KHM-40-F3-11141-0 6X

BALL VALVE; NOMINAL SIZE: 2 "; PRESSURE: 5800 PSI; FLUIDS: AIR, WATER, OIL, GAS. TEMPERATURE RANGE FROM -20 °C TO +260 °C; DIAL MATERIAL: CARBON STEEL; BODY MATERIAL: CARBON STEEL FORGED; PITCH TYPE: NOMINAL; NP 210, 558092- 13000 PSI; KHM-50F3-1114 ND 50

FILTER CARTRIDGES