BALL VALVE; NOMINAL SIZE: 3/4 IN MOUNTING TYPE: NPT THREADED PER ANSI B1.20.1; FLUIDS: AIR, WATER, OIL, GAS. TEMPERATURE RANGE FROM -20 °C TO +260 °C DIAL MATERIAL: BRONZE; BODY MATERIAL: CAST BRONZE PITCH TYPE: TOTAL; PRESSURE: 600 WOG
HYDRAULIC CYLINDER; PISTON SIZE: 160 MM; STROKE: 300 MM; STEM: 110 MM; ANCHORAGE: MALE WITH BALLET BOTH ENDS; MAXIMUM WORKING PRESSURE: 300 KG/CM2; FLUIDS: ANTI-FLAMMABLE OIL; EFFECT TYPE: DOUBLE EFFECT; PLAN NUMBER: 606300212; DOUBLE EFFECT HYDRAULIC CYLINDER 160
HYDRAULIC CYLINDER; TYPE: HYDRAULIC; PISTON SIZE: 60.1/8"; RA STROKE: 42"; STEM: 1.3/4 "; ANCHOR: CLAVIS; MAXIMUM WORKING PRESSURE: 1500 PSI; FLUIDS: MINERAL OIL; TYPE OF EFFECT: DOUBLE; PLAN NUMBER: HC.LAM.LAFR.TAND-MDT10046; SLEEVE 4"; 1-12"-12 UNF FEMALE CLAVIS; FOR 3/4" CONNECTORS CODE 61; CYLINDER FOR X-RAY GUARD FOR COLD TANDEM MILL
EBT DOOR; MACHINE: EAF OVEN; A) LARGE LID AND SMALL LID PLATES, 1.1/2" THICK, ASTM-A36 CARBON STEEL. B) LARGE LID COIL IN DIÁ TUBE. 1.1/2", CÉD. 80, IN ASTM-A106B STEEL. C) SMALL CAP COIL IN DIÁ TUBE. 1.1/2", CÉD. 80, IN ASTM-A106B STEEL. D) TUBE FOR DAY AIR. 1/2", CÉD. 80, IN ASTM-A106B STEEL. E) SAE-62 BRONZE BUSHINGS. F) ARROW IN HOLLOW BAR SAE-1518. G) SAE-1018 STEEL BOLTS. H) EXTERIOR SUPPORT PLATES IN ASTM-A36 STEEL. I) 2 DEUBLIN BRAND ROTARY JOINTS, NO. FROM PART 557-000-001, DIÁ. 1.1/2" NPT THREAD. J) BAR FOR SEALING BETWEEN TUBES, DI. 5/8", IN SAE-1018 STEEL. K) COPLES DAY. 1" AND ELBOWS DAY. 1.1/2", IN CARBON STEEL ASTM-A105 AND A234WPB
QUICK ACTION VALVE NOMINAL SIZE: 1-1/4 "; PRESSURE: 3000 PSI; MOUNTING TYPE: NPT THREADED ACCORDING TO ANSI B1.20.1; FLUIDS: AIR, WATER, OIL, GAS. TEMPERATURE RANGE UP TO +225 °C; DIAL MATERIAL: CARBON STEEL; BODY MATERIAL: FORGED CARBON STEEL; STEP TYPE: NOMINAL
GLOBE VALVE; NOMINAL SIZE: 3 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C) BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; ASCENDING STEM; BODY MATERIAL STANDARD: ASTM A21 6 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NO. 8 (13 C R Y HARDFACED); GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1873; CLASS (PRESSURE-TEMPERATURE) ANSI B16.34; DISTANCE BETWEEN FACES AN SI B16.10; STANDARD FOR TESTING API 598; THE VALVE MUST BE PROVIDED WITH A LOCKING DEVICE SUITABLE FOR USING A PADLOCK WITH A N OMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM
LOCK OR GATE VALVE; TYPE: ASCENDING STEM; NOMINAL SIZE: 6 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C); BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; BODY MATERIAL STANDARD: ASTM A216 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NRO 8 (13 CR AND HARDFACED); FLEXIBLE CRADLE TYPE; GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1414; CLASS (PRESSURE-TEMPERATUR A) ANSI B16.34; DISTANCE BETWEEN FACES ANSI B16.10; STANDARD FOR TESTING AP I 598; THE VALVE MUST BE PROVIDED WITH THE PTO LOCKING DEVICE TO USE PADLOCK WITH NOMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM
HOLD; INTERIOR DIAMETER: 150 MM; OUTER DIAMETER: 180 MM; THICKNESS/LENGTH: 15 MM; PROFILE TYPE: NITRILE COATED DOUBLE LIP; FLUIDS: OIL; MATERIAL: NITRILE (BLUE); SHORE HARDNESS: 70 -75 SHORE "A"; T EMPERATURE RANGE: -54 TO 121?C; SHEET MATERIAL: 18 GAUGE BLACK SHEET, SPRING: PIANO WIRE.; BRAND 1: INGEL; N-PART 1: BA180; MARK 2: PIT; N-PART 2: 150X180X15 NITRILE COATED DOUBLE LIP
SEAL LIP 75X100X13
(Raktáron)
SEAL LIP,75X100X13MM,FPM - VIT ON,OIL SEAL - SINGLE LIP - TYP E G
SEAL LIP 65X90X13M
(Raktáron)
SEAL LIP,65X90X13MM,FPM - VITO N,OIL SEAL - DOUBLE LIP - TYPE G
SEAL LIP 80X105X13
(Raktáron)
SEAL LIP,80X105X13MM,FPM - VIT ON,OIL SEAL - DOUBLE LIP - TYP E G
SEAL LIP 85X105X13
(Raktáron)
SEAL LIP,85X105X13MM,FPM - VIT ON,OIL SEAL - DOUBLE LIP - TYP E G
SEAL LIP 140X180X1
(Raktáron)
SEAL LIP,140X180X15MM,FPM - VI TON,OIL SEAL - DOUBLE LIP - TY PE G
IN-LINE MOUNT NON-RETURN VALVE; TYPE: CLAPPER; CLASS: CLASS 150 NOMINAL SIZE: 2 IN; MOUNTING TYPE: BSPT THREADED ACCORDING TO DIN 2999; FLUI TWO: WATER, AIR, OIL. MAXIMUM TEMPERATURE 400°F (204°C); SHAPE: STRAIGHT; WORKING POSITION: HORIZONTAL / VERTICAL WITH UPWARD FLOW; BODY MATERIAL: BRONZE; RETENTION MECHANISM MATERIAL: BRONZE; DIMENSIONS ACCORDING TO STANDARD: MSS-SP-80; BODY AND LID MATERIAL: BRONZE ASTM B 62; RETENTION MECHANISM: CLAPPER; CONSTRUCTION FORM: STRAIGHT TYPE 3 SE GUN MSS-SP-80; CLAPPER MATERIAL: BRONZE; SEAT MATERIAL: BRO NCE; CLASS 150 ;WORK POSITION: HORIZONTAL; DESIGN STANDARD FOR BRONZE VALVES, WALL THICKNESS AND CLASSES (PRESSURE/TEMPERATURE) ACCORDING TO MSS-SP-80; STANDARD FOR TESTING API 598; BSPT THREADED ENDS
IN-LINE MOUNT NON-RETURN VALVE; TYPE: CLAPPER; CLASS: CLASS 150 NOMINAL SIZE: 3 IN; MOUNTING TYPE: FLANGES ACCORDING TO ANSI B16.5; FLUIDS: WATER, OIL, AND GASES. NON-CORROSIVE FLUIDS, TEMPERATURE RANGE -20°F (-30°C) TO +800°F (+425°C); SHAPE: STRAIGHT; WORKING POSITION: H ORIZONTAL / VERTICAL WITH UPWARD FLOW; BODY MATERIAL: CAST BOND CARBON STEEL; RETENTION MECHANISM MATERIAL: STAINLESS STEEL; DIMENSIONS ACCORDING TO STANDARD: API 600, ASME B16.34; BODY AND LID MATERIAL: CAST CARBON STEEL ASTM A-216 GRADE WCB; CLAPPER MATERIAL STANDARD: ASTM A 296 GRADE CA15 STAINLESS STEEL; SEAT MATERIAL: STELLITE; DESIGN STANDARD FOR FLANGED CAST STEEL VALVES API 600, WALL THICKNESS AND CLASSES (PRESSURE TEMPERATURE RELATIONSHIP) ACCORDING TO ASME B16.34, API 600; DISTANCE BETWEEN FACES ACCORDING TO ANSI B16.10; STANDARD FOR TESTING API 598
DIRECTIONAL CONTROL VALVE; NOMINAL SIZE: D05, 05; MAXIMUM OPERATING PRESSURE: 3000 PSI; ASSEMBLY TYPE: SUBPLATE; FLUIDS: HYDRAULIC; NUMBER OF WAYS: 4/3; OPERATION TYPE: SOLENOID; VOLTAGE: 24 VDC; FLOW: 25 GAL/MIN; COIL TYPE: DIN 43650
TURBINE PUMP (CENTRIFUGAL); MAXIMUM WORK PRESSURE 6 BAR; FLOW: 4 M3/HR; MOUNTING TYPE: IMMERSIONE; FLUIDS: OIL - WATER; PUMP FOR MOVING GLYCOL FOR COOLING LATHES EMAG
POLYETHYLENE OR PLASTIC BOTTLE; APPLICATION: OIL SAMPLING FOR LUBRICANT ANALYSIS; CAPACITY FROM 100 TO 130 ML (4 TO 5 OUNCES), THREAD DIAMETER ON THE LID 38 MM, MAXIMUM OUTER DIAMETER 53 MM, MINIMUM THICKNESS OF PAIR ED 0.8 MM. INCLUDES THE LID, THEY MUST BE SUPPLIED CLOSED, FREE OF PLASTIC BURRS AND/OR IMPURITIES, CLEAN - LESS THAN 100 PARTICLES >10 MICR ONS/ML. THE COMMERCIAL PRESENTATION MUST BE IN A SEALED PLASTIC BAG WITH 20 PCS.
GATE VALVE BODY
PLATE DN 2400
PN 2.5 FOR GAS AFO-COK SCREW
EXTERNAL,
WEDGE SHUTTER -
CONSTRUCTION FEATURES
MADE OF STEEL
ELECTROWELDED
FE 42B UNI 7070
THERMALLY TREATED
- BODY HOLDING SEATS
AISI 316 /
AISI 410 WEDGE
- AISI 316 STEEL ROD
- BOLTS B7/2H -
GRAFOIL STAFFING GLAND
- BOTTOM OF BODY PN 16 DN 80 - FLANGED CONNECTIONS PN 2.5
- COKE GAS SERVICE 600 MM
H20 AT 50?C
CONTROLLED BY ACTUATOR
EXPLOSION-PROOF ELECTRIC
GREAT DREHMO XD 1000
ADAPTER
ENGINE 3/380/50 - COMPLETE
OF TRANSMITTER
POSITION 4-20 MA
FLAT BODY GATE VALVE EXTERNAL SCREW WITH
RISE STEM - DN2800 PN2.5 CONSTRUCTION: FLEXIBLE WEDGE PLUG FOR BIDIRECTIONAL SEAL
- DIFFERENCE BETWEEN BODY AND PLUG SEALING SURFACES OF AT LEAST 20 POINTS BRINNEL DN200 FLANGED CONNECTION
PN16 ON BACKGROUND
VALVE
- MECHANICAL SYSTEM
REGISTRATION
LIMIT SWITCH AND RELEASE
MEDAL
IN CASE OF FITTING SEATS
- MEDAL STEM PROVIDED
OF HANDLE
THREADED SUITABLE FOR
HANDLING
BY MEANS OF A SELF-PROPELLED CRANE IN
CASE OF BREAKAGE
ACTUATOR - COMPLETE WITH
SUITABLE TIE
TO MAINTENANCE IN
POSITION OPEN IN
DISASSEMBLY CASE
GROUP
ACTUATOR-REDUCER
MATERIALS:
- SEATS SEAL: AISI316
ON THE VALVE BODY
AISI416
ON THE OBTURATING WEDGE.
- VALVE STEM: AISI316BODY-COVER-WEDGE:ASTM
A216WCB
(OR)
C20 UNI3608 (OR)
FE42B UNI7070
WITH SHEETS
ELECTROWELDED E
THERMALLY TREATED
- BOLTS: ASTM A B/7
1942M
- STAFFING GLAND: GRAFOIL
ELECTRIC ACTUATOR:
- ELECTRIC ACTUATOR
ROTORK "IQ" SERIES
WITH "IS" REDUCER -
POWER 400V-50HZ 3PH
CUS