카탈로그 BUTECH

CHUTE COVER SCRAP DOWN LH SLITTER MOUNTED BUTECH DWG. R-020-5060

WIPING PIN DWG. M-020-3825

COPLE; DODGE GRID LIGN COUPLING TYPE T10 , SIZE 1090T BORE ONE HUB 3.2475 / 3.2485 DIA. W/ 3/4 X 3/8 KEYWAY BORE OTHER HUB 2.3730 / 2.3735 DIA. W/ 5/8 X 5/16 KEYWAY. DRAWING BUTECH # , ITEM # 1

CUPLA; OUTER TUBE DIAMETER: 1/4 IN; THREAD TYPE: UNF-28 HPP LH; MAXIMUM WORKING PRESSURE: 60000 PSI; MATERIAL: STAINLESS STEEL; LENGTH= 3/8"

NIPPLE; OUTER TUBE DIAMETER: 1/4 IN; THREAD TYPE: UNF-28 HPP -IH; MAXIMUM WORKING PRESSURE: 60000 PSI; MATERIAL: STAINLESS STEEL; L2 THREAD TYPE: UNF-28 HPP -IH

CAM BEARING; PIVOT ARM CAMROL

VALVE OTHER TYPE; TYPE: TWO WAY STRAIGHT PASSAGE NEEDLE; NOMINAL SIZE: 1/ 4; MAXIMUM WORKING PRESSURE: 60000 PSI; MOUNTING TYPE: THREADED; VALVE OTHER TYPE; TYPE: TWO WAY STRAIGHT PASSAGE NEEDLE; NOMINAL SIZE: 1/4 "; MAXIMUM WORKING PRESSURE: 60000 PSI; MOUNTING TYPE: THREADED

HYDROPNEUMATIC ELEMENT FOR SPECIAL MACHINES; COMPONENT: GLAND FOR 60000 PSI, FOR 1/4" PIPES; MACHINE: FAPE HYDRAULIC TEST; HYDROPNEUMATIC ELEMENT FOR SPECIAL MACHINES; COMPONENT: GLAND FOR 60000 PSI, FOR 1/4" PIPES; MACHINE: FAPE HYDRAULIC TEST; BRAND 1: BUTECH; PART NO. 1: GLAND - 60G4; MANUFACTURER 1: BUTECH; PART NO. 1: GLAND - 60G4

HYDROPNEUMATIC ELEMENT FOR SPECIAL MACHINES; COMPONENT: COLLAR PAR AT 60000 PSI, TO BE USED IN PIPES OF 1/4" DIAMETER; MACHINE: FAPE HYDRAULIC TEST; HYDROPNEUMATIC ELEMENT FOR SPECIAL MACHINES; COMPONENT: COLLAR FOR 60000 PSI, TO BE USED IN PIPES OF 1/4" DIAMETER; MACHINE: FAPE HYDRAULIC TEST; BRAND 1: BUTECH; PART NO. 1: COLLAR-60C4; MANUFACTURER 1: BUTECH; PART NO. 1: COLLAR-60C4

KNIFE FOR SCRAP CHOPPER

8 DWG. D-035-0257 STRIP CLAMP AIR CYLINDER BUTECH JOB