카탈로그 HONEYWELL

전위차계

SENSEPOINT AND SIGNALPOINT TOXIC CALIBRATION KIT INCLUDING CALIBRATION COVER, REMOVAL TOOL, POTENTIOMETER ADJUSTMENT TOOL

ACTUATOR: VC2714ZZ11 2 POSITION, ON-OFF ACTUATOR, 24V, 60HZ, 3 WIRE 7/8" FLEX-CONDUIT, PLEN- UM RATING, 1.5 METER CABLE, AUX SW, USE W/ SPDT CTRLR, H/C APPLIC

ACTUATOR: VC6831ZZ11 24V (50-60HZ), 120 SEC. TIMING, 3 WIRE ACTUATOR SERIES 60 FLOATING, W/ AUX SWITCH, 1 METER CABLE

ACTUATOR: VC6834ZZ11 SERIES 60 FLOATING ACTUATOR, 24V, 50-60HZ, 120 SEC TIMING, 3 WIRE, 7/8 IN FLEX-CONDUIT, PLENUM RATING, AUX SW, 1.5 METER CABLE

ACTUATOR: VC6931ZZ11 24V (50-60HZ) 120 SEC. TIMING, 3 WIRE ACTUATOR SERIES 60 FLOATING, 1 METER CABLE.

ACTUATOR ACCESSORY: 200976A ACTUATOR ACCESSORY - AUXILIARY FEEDBACK POTENTIOMETER (0 TO 500 OHM) USED WITH: ML6161, ML6174, ML7161, ML7174

ACTUATOR ACCESSORY: 200976C ACTUATOR ACCESSORY - AUXILIARY FEEDBACK POTENTIOMETER (0 TO 2000 OHM) USED WITH: ML6161, ML6174, ML7161, ML7174

CONDUIT ADAPTER: VC7934ZZ11 2-10VDC MODULATING ACTUATOR, 24V (50-60HZ)120 SEC NOMINAL TIMING, PLENUM RATED, 1 METER CABLE, 3/8" FLEX CONDUIT ADAPTER.

CONTROLLER: VC2114ZZ11 2 POSITION (ON/OFF), 24V (60HZ) 3 WIRE ACTUATOR, CONDUIT, PLENUM RATING, 1 METER CABLE, USE W/ SPDT CONTROLLER

CONTROLLER: VC8111ZZ11 2 POSITION (ON/OFF), 24V (60HZ) 2 WIRE + COMMON ACTUATOR,1 METER CABLE, USE WITH SPST CONTROLLER.

CONTROLLER: VC8714ZZ11 2 POSITION, ON/OFF ACTUATOR, 24V, 60HZ, 2 WIRE +COMMON VERSION,PLENUM RATING, 1.5 METER CABLE, AUX SW, USE W/SPST CONTROLLER

COVER ASSEMBLY: 190389AD COVER ASSEMBLY T4039 WITH THERMOMETER.

COVER ASSEMBLY: 190520A COVER ASSEMBLY FOR T921, INCLUDES THERMOMETER, RANGE 60 TO 90 DEGREE F.

COVER ASSEMBLY: T4039M1004 COVER ASSEMBLY FOR T4039 LE- SS THERMOMETER. MANUAL SWITCH, MARKED: OFF-HI-MED-LO WITH POSITIVE OFF

CRANKARM: 106783A DAMPER CRANKARM FOR 1/2 INCH DIAMETER AXLE

CRANKARM: 312867C ADJUSTABLE CRANKARM FOR 1/2" DIAMETER SHAFT

FILTER BOWL: 14003428-001 AMBER TINT FILTER BOWL 4 1/64 INCH LONG X 2 59/64 INCH DIAMETER INCLUDING BUSHING (313003)

MANUAL POTENTIOMETER: 30112A 135 OHM POTENTIOMETER USED WITH S443A MANUAL POTENTIOMETER

MANUAL POTENTIOMETER: S963B1128 MANUAL POTENTIOMETER FOR SERIES 90 SYSTEMS. OUTLET BOX MOUNT, OPEN/CLOSE SCALE, 135 OHM.S963B1128 POTENTIOMETER BY HONEYWELL IS FOR CHECKOUT OF W973 LOGIC PANELS AND W975 SATELLITE SEQUENCERS. • SIMULATES HEAT AND COOL RAMP SIGNAL OF A T7067 DUAL SET POINT THERMOSTAT AND ECONOMIZER LOW LIMIT FUNCTION. • CONSISTS OF 2 POTENTIOMETERS AND A RESISTOR ASSEMBLY MOUNTED IN A TEST BOX. • PROVIDES A HEAT/COOL RAMP SIGNAL FROM LESS THAN 2 VDC (MIN) TO 16.6 VDC (MAX). • S963B1128 ALSO PROVIDES AN ECONOMIZER LOW LIMIT SIGNAL FROM 4.0 VDC (EQUIVALENT TO 45 F (7 C) AT C7046 DISCHARGE SENSOR) TO 4.5 VDC (EQUIVALENT TO 69 F (21 C). • FOUR TEST LEADWIRES HAVE COLOR-CODED BANDS WITH CORRESPONDING W973 TERMINAL NUMBERS. • LEADWIRES HAVE ALLIGATOR CLIPS FOR EASY CONNECTION TO W973 TERMINALS.