카탈로그 JAES

GROUP FILTER-REGULATOR-OLEATOR 1 INDUSTRY STANDARD FOR IMP. AIRCHOC COMPOSED BY NR. 2 SHUT-OFF VALVES. EXHAUST 1

VALVES WITH A SS FLOAT

TANK 5 CARBON STEEL FULL IMMERSION SERIES NUMBER 13 VALVES 1 1/2 SERIES TI035 TURBO IN05P35N13P220FG1

TANK 5 CARBON STEEL FULL IMMERSION SERIES NUMBER 14 VALVES 1 1/2 SERIES TI035 TURBO IN05P35N14P220FG1

STEAM VALVES

공압 밸브

AIR DRYER W/ DRAIN VALVES

REGULATOR FOR AIR AND GAS; USE: REFRIGERANT GASES R12, R22 AND R134; THREADED CONNECTION; MANIFOLD CHARACTERISTICS: OSCILLATING SUPPORT, HIGH AND LOW DIAM MANOMETERS. 63 MM, SIDE SHUT-OFF VALVES AND STEM WITH ADJUSTABLE PACK GLAND, PRESSURE SCALE FOR R12, R22 AND R134 REFRIGERANT GASES EXPRESSED IN POUNDS / IN² AND BAR, TEMPERATURE SCALE IN °C, MALE /4 FLARE CONNECTIONS, SET OF 90 CM HOSES; NOMENCLATURE: 536_R12-22-134 2 ( MODEL 536 FOR REFRIGERANT GASES R12-R22- AND R134. IT HAS 2 GAUGES. HIGH AND LOW PRESSURE)

FIRE WATER DIVIDER UNI70 2X45 WITH SA RACINESCHE BODY E BRASS GATE VALVES AT- SCREW AND WALKING HEELS DELTA B BRASS SEALS IN SYNTHETIC RUBBER AT- A-SHAPED SWIVEL HEEL. (EX BRONZE)

LINE-MOUNTED NON-RETURN VALVE; TYPE: CLAPPER; CLASS: CLASS 150; NOMINAL SIZE: 2"; MOUNTING TYPE: THREADED BSPT PER D IN 2999; FLUIDS: WATER, AIR, OIL. MAX TEMPERATURE 400°F (204°C); SHAPE: STRAIGHT; WORKING POSITION: HORIZONTAL / VERTICAL WITH UP FLOW ; BODY MATERIAL: BRONZE; RETAINING MECHANISM MATERIAL: BRONZE; DIMENSIONS ACCORDING TO STANDARD: MSS-SP-80; BODY AND COVER MATERIAL: BRONZE ASTM B62; RETAINING MECHANISM: FLAP; CONSTRUCTION SHAPE: STRAIGHT TYPE 3 ACCORDING TO MSS-SP-80; CLAP MATERIAL: BRONZE; SEAT MATERIAL: BRONZE; CLASS 150; WORKING POSITION: HORIZONTAL; DESIGN STANDARD FOR BRONZE VALVES, WALL THICKNESS AND CLASSES (PRESSURE/TEMPERATURE) ACCORDING TO MSS- SP-80; API 598 TESTING STANDARD; BSPT THREADED ENDS

UHDE81: REQUEST FOR REPLACEMENT VALVE FOR CLAUS OVENS, UHDE SOLP PLANT FOR THE ACQUISITION OF SPARE PARTS FOR BUTTERFLY VALVES FOR CLAUS OVEN A/B, FROM THE SUBPRODUCTS PLANT. FLUID LINE - ACID VAPORS. REQUEST THE FOLLOWING CHARACTERISTICS. 12" LUG TYPE BUTTERFLY VALVE, 150 SERIES, CARTRIDGE TYPE SEAT, CAST PLUG WITH POLISHED SPHERICAL EDGE, CONICAL SPINES, SOLID STEM, PERFORATED ACTUATOR MOUNTING PLATE ACCORDING TO ISO 5211 STANDARD, FOR A WORKING PRESSURE OF 10.5KG/CM2 (150PSI) MANUFACTURED ACCORDING TO API 609 STANDARD, API 598 WATERTIGHTNESS. DRIVE: FREE SHAFT, DRILLED PLATE ISO 5211 F12 AND STANDARD STEM OUTLET. COMPONENT MATERIALS: BODY: NODULAR CAST IRON ASTM 536 GR. 65-45-12 PLUG: CAST STAINLESS STEEL AISI 316 STEM: AISI 420 STAINLESS STEEL SEAT: TEFLON WITH EPDM BACK BUSHINGS: BRONZE / ACETAL THANK YOU.-

FULL BORE BALL VALVES - STEEL BODY. CARBON STAINLESS STEEL BALL - SEALS AND GASKETS IN TEFLON

FULL BORE BALL VALVES - CARBON STEEL BODY SF ERA STAINLESS STEEL - TEFLON SEALS AND GASKETS - CONNECTIONS

CHECK VALVE SIZE: DN15 BDK VALVES FORGED LIFT CHECK VALVE,

PRESSURE TRANSDUCER AND SOLENOID VALVE FOR PUMPING UNIT WITH DIESEL ENGINE PRESSURE TRANSDUCER WITHOUT SNUBBER 0.5-4.5 V 0PSI 600PSI PACKARD METRIPACK 150 3 SOLENOID VALVES SOLENOID VALVE 12VDC 3WAY-NONC 0PSI C/W 600PSI BRASS 15"LEADS.

SPRING DIAPHRAGM; APPLICATION: GAS AND OXYGEN VALVES, ON-OFF; DIAPHRAGM KIT FOR HEATING VALVE; EXT DIAMETER: 51 MM, WITH SHEET, BRONZE AND SPRING WASHER

BLIND FLANGE KIT FOR MANUAL VENT VALVES OF THE ACCUMULATOR OF THE DESCAMING SYSTEM (WP010379+WP001893+AB000002)

IN-LINE MOUNT NON-RETURN VALVE; TYPE: CLAPPER; CLASS: CLASS 150 NOMINAL SIZE: 2 IN; MOUNTING TYPE: BSPT THREADED ACCORDING TO DIN 2999; FLUI TWO: WATER, AIR, OIL. MAXIMUM TEMPERATURE 400°F (204°C); SHAPE: STRAIGHT; WORKING POSITION: HORIZONTAL / VERTICAL WITH UPWARD FLOW; BODY MATERIAL: BRONZE; RETENTION MECHANISM MATERIAL: BRONZE; DIMENSIONS ACCORDING TO STANDARD: MSS-SP-80; BODY AND LID MATERIAL: BRONZE ASTM B 62; RETENTION MECHANISM: CLAPPER; CONSTRUCTION FORM: STRAIGHT TYPE 3 SE GUN MSS-SP-80; CLAPPER MATERIAL: BRONZE; SEAT MATERIAL: BRO NCE; CLASS 150 ;WORK POSITION: HORIZONTAL; DESIGN STANDARD FOR BRONZE VALVES, WALL THICKNESS AND CLASSES (PRESSURE/TEMPERATURE) ACCORDING TO MSS-SP-80; STANDARD FOR TESTING API 598; BSPT THREADED ENDS

IN-LINE MOUNT NON-RETURN VALVE; TYPE: CLAPPER; CLASS: CLASS 150 NOMINAL SIZE: 3 IN; MOUNTING TYPE: FLANGES ACCORDING TO ANSI B16.5; FLUIDS: WATER, OIL, AND GASES. NON-CORROSIVE FLUIDS, TEMPERATURE RANGE -20°F (-30°C) TO +800°F (+425°C); SHAPE: STRAIGHT; WORKING POSITION: H ORIZONTAL / VERTICAL WITH UPWARD FLOW; BODY MATERIAL: CAST BOND CARBON STEEL; RETENTION MECHANISM MATERIAL: STAINLESS STEEL; DIMENSIONS ACCORDING TO STANDARD: API 600, ASME B16.34; BODY AND LID MATERIAL: CAST CARBON STEEL ASTM A-216 GRADE WCB; CLAPPER MATERIAL STANDARD: ASTM A 296 GRADE CA15 STAINLESS STEEL; SEAT MATERIAL: STELLITE; DESIGN STANDARD FOR FLANGED CAST STEEL VALVES API 600, WALL THICKNESS AND CLASSES (PRESSURE TEMPERATURE RELATIONSHIP) ACCORDING TO ASME B16.34, API 600; DISTANCE BETWEEN FACES ACCORDING TO ANSI B16.10; STANDARD FOR TESTING API 598

REGULATOR FOR AIR AND GAS; USE: REFRIGERANT GASES R12, R22 AND R134; THREADED CONNECTION; MANIFOLD FEATURES: SWING BRACKET, HIGH AND LOW DIAM. MANOMETERS. 63 MM, SIDE SHUT-OFF VALVES AND STEM WITH ADJUSTABLE GLAND, PRESSURE SCALE FOR REFRIGERANT GASES R12, R22 AND R134 EXPRESSED IN POUNDS / INCHES² AND BAR, TEMPERATURE SCALE IN °C, CONNECTIONS /4 MALE FLARE, SET OF 90 CM HOSES; NOMENCLATURE: 536_R12-22-134 2 (MODEL 536 FOR REFRIGERANT GASES R12-R22- AND R134. HAS 2 HIGH AND LOW PRESSURE MANOMOMETERS)