Catalog JAES

BALL VALVE; NOMINAL SIZE: 3/4 IN MOUNTING TYPE: NPT THREADED PER ANSI B1.20.1; FLUIDS: AIR, WATER, OIL, GAS. TEMPERATURE RANGE FROM -20 °C TO +260 °C DIAL MATERIAL: BRONZE; BODY MATERIAL: CAST BRONZE PITCH TYPE: TOTAL; PRESSURE: 600 WOG

HYDRAULIC CYLINDER; PISTON SIZE: 160 MM; STROKE: 300 MM; STEM: 110 MM; ANCHORAGE: MALE WITH BALLET BOTH ENDS; MAXIMUM WORKING PRESSURE: 300 KG/CM2; FLUIDS: ANTI-FLAMMABLE OIL; EFFECT TYPE: DOUBLE EFFECT; PLAN NUMBER: 606300212; DOUBLE EFFECT HYDRAULIC CYLINDER 160

HYDRAULIC CYLINDER; TYPE: HYDRAULIC; PISTON SIZE: 60.1/8"; RA STROKE: 42"; STEM: 1.3/4 "; ANCHOR: CLAVIS; MAXIMUM WORKING PRESSURE: 1500 PSI; FLUIDS: MINERAL OIL; TYPE OF EFFECT: DOUBLE; PLAN NUMBER: HC.LAM.LAFR.TAND-MDT10046; SLEEVE 4"; 1-12"-12 UNF FEMALE CLAVIS; FOR 3/4" CONNECTORS CODE 61; CYLINDER FOR X-RAY GUARD FOR COLD TANDEM MILL

EBT DOOR; MACHINE: EAF OVEN; A) LARGE LID AND SMALL LID PLATES, 1.1/2" THICK, ASTM-A36 CARBON STEEL. B) LARGE LID COIL IN DIÁ TUBE. 1.1/2", CÉD. 80, IN ASTM-A106B STEEL. C) SMALL CAP COIL IN DIÁ TUBE. 1.1/2", CÉD. 80, IN ASTM-A106B STEEL. D) TUBE FOR DAY AIR. 1/2", CÉD. 80, IN ASTM-A106B STEEL. E) SAE-62 BRONZE BUSHINGS. F) ARROW IN HOLLOW BAR SAE-1518. G) SAE-1018 STEEL BOLTS. H) EXTERIOR SUPPORT PLATES IN ASTM-A36 STEEL. I) 2 DEUBLIN BRAND ROTARY JOINTS, NO. FROM PART 557-000-001, DIÁ. 1.1/2" NPT THREAD. J) BAR FOR SEALING BETWEEN TUBES, DI. 5/8", IN SAE-1018 STEEL. K) COPLES DAY. 1" AND ELBOWS DAY. 1.1/2", IN CARBON STEEL ASTM-A105 AND A234WPB

QUICK ACTION VALVE NOMINAL SIZE: 1-1/4 "; PRESSURE: 3000 PSI; MOUNTING TYPE: NPT THREADED ACCORDING TO ANSI B1.20.1; FLUIDS: AIR, WATER, OIL, GAS. TEMPERATURE RANGE UP TO +225 °C; DIAL MATERIAL: CARBON STEEL; BODY MATERIAL: FORGED CARBON STEEL; STEP TYPE: NOMINAL

GLOBE VALVE; NOMINAL SIZE: 3 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C) BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; ASCENDING STEM; BODY MATERIAL STANDARD: ASTM A21 6 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NO. 8 (13 C R Y HARDFACED); GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1873; CLASS (PRESSURE-TEMPERATURE) ANSI B16.34; DISTANCE BETWEEN FACES AN SI B16.10; STANDARD FOR TESTING API 598; THE VALVE MUST BE PROVIDED WITH A LOCKING DEVICE SUITABLE FOR USING A PADLOCK WITH A N OMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

LOCK OR GATE VALVE; TYPE: ASCENDING STEM; NOMINAL SIZE: 6 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C); BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; BODY MATERIAL STANDARD: ASTM A216 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NRO 8 (13 CR AND HARDFACED); FLEXIBLE CRADLE TYPE; GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1414; CLASS (PRESSURE-TEMPERATUR A) ANSI B16.34; DISTANCE BETWEEN FACES ANSI B16.10; STANDARD FOR TESTING AP I 598; THE VALVE MUST BE PROVIDED WITH THE PTO LOCKING DEVICE TO USE PADLOCK WITH NOMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

HOLD; INTERIOR DIAMETER: 150 MM; OUTER DIAMETER: 180 MM; THICKNESS/LENGTH: 15 MM; PROFILE TYPE: NITRILE COATED DOUBLE LIP; FLUIDS: OIL; MATERIAL: NITRILE (BLUE); SHORE HARDNESS: 70 -75 SHORE "A"; T EMPERATURE RANGE: -54 TO 121?C; SHEET MATERIAL: 18 GAUGE BLACK SHEET, SPRING: PIANO WIRE.; BRAND 1: INGEL; N-PART 1: BA180; MARK 2: PIT; N-PART 2: 150X180X15 NITRILE COATED DOUBLE LIP

SEAL LIP,75X100X13MM,FPM - VIT ON,OIL SEAL - SINGLE LIP - TYP E G

SEAL LIP,65X90X13MM,FPM - VITO N,OIL SEAL - DOUBLE LIP - TYPE G

SEAL LIP,80X105X13MM,FPM - VIT ON,OIL SEAL - DOUBLE LIP - TYP E G

SEAL LIP,85X105X13MM,FPM - VIT ON,OIL SEAL - DOUBLE LIP - TYP E G

SEAL LIP,140X180X15MM,FPM - VI TON,OIL SEAL - DOUBLE LIP - TY PE G