Κατάλογος JAES

ESCAPE RELEASE, 442G-MAB, STANDARD SHAFT CODIGO: 442G-MABE1

AIR MOTOR VANE, ITEM, FOR STRAPPING MACHINE MODEL M4

CLAMP ISOLATOR MK-16 3-A; MACHINE: LADLE REFINER SYSTEM; DRAWING NUMBER: MK-163-A; C CLAMP ISOLATOR MK-163-A1-1/4X25-9/16"X2'-1/9/16" LGWOVEN GLASS &EPOXY LAMINATE

REGULATOR FOR AIR AND GAS; USE: REFRIGERANT GASES R12, R22 AND R134; THREADED CONNECTION; MANIFOLD FEATURES: SWING BRACKET, HIGH AND LOW DIAM. MANOMETERS. 63 MM, SIDE SHUT-OFF VALVES AND STEM WITH ADJUSTABLE GLAND, PRESSURE SCALE FOR REFRIGERANT GASES R12, R22 AND R134 EXPRESSED IN POUNDS / INCHES² AND BAR, TEMPERATURE SCALE IN °C, CONNECTIONS /4 MALE FLARE, SET OF 90 CM HOSES; NOMENCLATURE: 536_R12-22-134 2 (MODEL 536 FOR REFRIGERANT GASES R12-R22- AND R134. HAS 2 HIGH AND LOW PRESSURE MANOMOMETERS)

ELECTRIC MOTOR 55KW CONSTRUCTION FORM B5 TYPE HF250M4 1470 RPM IP55 97A EEX

HAND TOOL OTHER TYPE; TYPE: PLASTIC; MATERIAL: RED POLYURETHANE DRAWING NUMBER: 2-63707-MO-01A; PLASTIC CRADLE FOR USE IN TERMINATION LINES TO CRADLE PIPE; SHORE HARDNESS 85-90.

DIRECTIONAL CONTROL VALVE; NOMINAL SIZE: D05, 05; MAXIMUM OPERATING PRESSURE: 3000 PSI; ASSEMBLY TYPE: SUBPLATE; FLUIDS: HYDRAULIC; NUMBER OF WAYS: 4/3; OPERATION TYPE: SOLENOID; VOLTAGE: 24 VDC; FLOW: 25 GAL/MIN; COIL TYPE: DIN 43650

BALL VALVE; NOMINAL SIZE: 2 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: ACIDS, AND WATER. TEMPERATURE RANGE: 0 TO 80 ºC DIAL MATERIAL: ECTFE (ETHYLENE CHLOROTRIFLUORETHYLENE); CUE RPO MATERIAL: POLYPROPYLENE; STEP TYPE: TOTAL; PRESSURE: CLASS 150; V ITON O RING; TEFLON SEAT AND DIAL; LEVER OPERATION TYPE; THE VALVE SHOULD BE PROVIDED WITH THE LOCKING DEVICE – SUITABLE FOR USING PADLOCK WITH NOMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

FERRULE; OUTER TUBE DIAMETER: 5/8 IN; DIMENSIONS ACCORDING TO STANDARD: SAEJ 514 TYPE 080115A; NOMINAL DIAMETER: 5/8 "; WILL BE DELIVERED PACKED IN CARDBOARD BOXES AND PROTECTED AGAINST HITS AND DIRTY FROM TRANSPORTATION AND STORAGE

ADAPTER; TYPE: STRAIGHT TUBE-TUBE; OUTER DIAMETER TUBE: 10 MM; THREAD TYPE L1: M18X1.5; L2 THREAD TYPE: M18X1.5; MATERIAL: BRONZE

TURBINE PUMP (CENTRIFUGAL); MAXIMUM WORK PRESSURE 6 BAR; FLOW: 4 M3/HR; MOUNTING TYPE: IMMERSIONE; FLUIDS: OIL - WATER; PUMP FOR MOVING GLYCOL FOR COOLING LATHES EMAG

POLYETHYLENE OR PLASTIC BOTTLE; APPLICATION: OIL SAMPLING FOR LUBRICANT ANALYSIS; CAPACITY FROM 100 TO 130 ML (4 TO 5 OUNCES), THREAD DIAMETER ON THE LID 38 MM, MAXIMUM OUTER DIAMETER 53 MM, MINIMUM THICKNESS OF PAIR ED 0.8 MM. INCLUDES THE LID, THEY MUST BE SUPPLIED CLOSED, FREE OF PLASTIC BURRS AND/OR IMPURITIES, CLEAN - LESS THAN 100 PARTICLES >10 MICR ONS/ML. THE COMMERCIAL PRESENTATION MUST BE IN A SEALED PLASTIC BAG WITH 20 PCS.

PIPE 3906-30 CARBOSILIC 30" T/C FOSAS

COMPENSATOR BAR 2D8989/14 FOR ASGENMCF6 ENGINE MAIN POLE

THREE-PHASE MOTOR BOB ROTOR. 380V 88A, 54HP, 960RPM, B3, AISL B/F

THERMOELEMENT ART NRO: T033496 PROVEEDOR: CONATEX FORM F - 22/16 MM. MATERIAL NO. 1.4841 NECK TUBE LENGTH IN MM: 200 FASTENING: BLIND FLANGE DN25 PN40 CONNECTION HEAD SHAPE: BUZH INSTALLATION LENGTH IN MM: 800 TO LOWER EDGE OF FLANGE MEASURING INSERT: 1XNICR-NI (K) MEASURING INSERT DIAMETER IN MM: 3.0 TOLERANCE CLASS 1 ACCORDING TO DIN EN 60584-2 MEASURING INSERT LENGTH IN MM: 1025 WITH HART TRANSMITTER TYPE C090211A MOUNTED IN THE CONNECTION HEAD COVER

INSULATION PLATE PL/ORG/A-8895-4880 M-4 PL/ORG/726904

DOUBLE DISTILLED WATER; EXTERNAL APPEARANCE: IN 5 LITER PACK

MOTOR B3C 180M2 B3 22KW 2 POLES 400V DELTA 50HZ IP55 CL.F/B S1 N.B.-BEARING GREASE FITTINGS -PTC WINDINGS

MERCURY RELAY