کاتالوگ TECNON

COUPLING

COUPLING DOUBLE ENGAGEMENT AGMA SIZE 3

FLEXIBLE COUPLING

FLEXIBLE COUPLING

COUPLINGS

GEAR REDUCER

TADSF 1035 /BS/MM/E COUPLING

COUPLER DENT-DENT SIZE 2.5 NI CRUSHED

MECHANICAL ACTUATOR; LOAD CAPACITY: 2 TON; RATIO: 1:6; RACE: 20 0 MM; UPPER OUTLET WITH PLATE

RUBBER BAND A-105

ELASTIC BAND; COUPLING MODEL: A-50; RUBBER, INTEGRALLY STRANDED

ELASTIC BAND; COUPLING MODEL: A-30; INTEGRAL RUBBER WOUND

ELASTIC BAND COUPLING MODEL: A-20; REFERENCE DRAWING: N/A RUBBER, INTEGRALLY STRINGED

FLEXIBLE COUPLING; TYPE: ELASTIC BAND FLEXIBLE; HUB 1 ID.-DIAMETER: UNMACHINED; HUB 2 ID.-DIAMETER: UNMACHINED R; MAXIMUM NOMINAL TORQUE: 200 NM; LENGTH: 125 MM; MAXIMUM OUTSIDE DIAMETER: 178 MM; REFERENCE DRAWING: N/A; MAXIMUM SPEED: 3000 RPM; LOW TORQUE SPACERLESS ELASTIC BAND; 2.8 HP @ 100 RPM; TEMPERATURE RANGE -18 TO 66?C ;10-1 UNIVERSAL MODEL

ENCODER (DIGITAL ANGULAR POSITION TRANSDUCER); PULSES/REVOLUTIONS: 102 4; MAXIMUM SPEED: 1450 RPM; OUTPUT SIGNAL: INCREMENTAL; ELECTRICAL VOLTAGE: 10 - 30 VDC; 6 CHANNELS; IP67; HOLLOW SHAFT

FLEXIBLE COUPLING; TYPE: INTERMEDIATE ELASTIC ELEMENT; INNER DIAMETER - HUB 1: 10 MM; INNER DIAMETER - HUB 2: 10 MM; MAXIMUM SPEED: 4000 RPM; LENGTH: 150 MM; MAXIMUM OUTER DIAMETER: 95 MM; MAXIMUM NOMINAL TORQUE: 90 NM TASG 20-CI/CI-ES-70

FLEXIBLE COUPLING; TYPE: FLEXIBLE WITH INTERMEDIATE (ELASTOMER) ELEMENT; INTERNAL DIAMETER - HUB 1: 16 MM; INTERNAL DIAMETER - HUB 2: 16 MM; MAXIMUM NOMINAL TORQUE: 333 NM; LENGTH: 140 MM; MAXIMUM OUTER DIAMETER: 167 MM; MAXIMUM SPEED: 3750 RPM; ONE NORMAL HUB AND ONE INTEGRAL HUB

GEAR COUPLING; TYPE: TOOTHED - TOOTHED; MAXIMUM RATED TORQUE: 52000 NM; LENGTH: 246 MM; MAXIMUM OUTER DIAMETER: 317.5 MM; MAXIMUM SPEED: 3600 RPM; BOTH TOOTHED HUBS; COUPLING FLANGE/FLANGED SLEEVE ACCORDING TO ANSI/AGMA 9008-B00 STANDARD (AGMA 516.01 REVISION) SIZE 4 SERIES 1000; BOLT CENTER DIAMETER: 279.40 MM; BOLT HOLE DIAMETER: 19.050 MM; QUANTITY OF BOLT HOLES: 8; FLANGE WIDTH AT MIDDLE COUPLING: 27 MM; FLANGES AND HUBS MADE OF FORGED SAE 4140 NITRIDED STEEL; BOTH HUBS MUST BE SUPPLIED WITH THE MINIMUM HOLE BUT DESIGNED TO BE MACHINED FOR A MAXIMUM SHAFT DIAMETER OF 150 MM; FLANGES WITH O'RING TYPE CLOSURE IN VIT ON MATERIAL; LUBRICATION HOLES PLACED BETWEEN THE FLANGE AND THE COVER TEETH, OR IN THE FLANGE (IN THIS CASE CONCEALED/RECESSED); THREADED HOLES FOR HUB REMOVAL; EXPOSED SCREWS CALIBRATED WITH UNF THREAD (PREFERABLY), SAE GRADE 5 (CLASS 8.8) OR EQUIVALENT MATERIAL STANDARD; HEXAGON NUTS (PREFERABLY SELF-LOCKING) WITH UNF THREAD (PREFERABLY), SAE GRADE 5 (CLASS 8.8) O

GEAR COUPLING; TYPE: TOOTHED - TOOTHED; HUB 1 INTERNAL DIAMETER: 0 MM; HUB 2 INTERNAL DIAMETER: 0 MM; MAXIMUM NOMINAL TORQUE: 4250 NM; LENGTH: 101 MM; MAXIMUM OUTER DIAMETER: 152.4 MM; MAXIMUM SPEED: 6,500 RPM; BOTH HUBES TOOTHED; COUPLING FLANGE/FLANGED SLEEVE ACCORDING TO ANSI/AGMA 9008-B00 STANDARD (AGMA 516.01 REVISION) SIZE 1.5 SERIES 10 00; BOLT CENTER DIAMETER: 122.25 MM; BOLT HOLE DIAMETER: 9.525 MM; NUMBER OF BOLT HOLES: 8; FLANGE WIDTH IN MIDDLE COUPLING: 19 MM; FLANGES AND HUBS IN FORGED SAE 4140 NITRIDED STEEL; BOTH HUBS MUST BE SUPPLIED WITH THE MINIMUM HOLE BUT DESIGNED TO BE MACHINED FOR A MAXIMUM SHAFT DIAMETER OF 61 MM; FLANGES WITH O'RING TYPE CLOSURE IN VITON MATERIAL; LUBRICATION HOLES PLACED BETWEEN THE FLANGE AND THE COVER TEETH, OR IN THE FLANGE (IN THIS CASE CONCEALED/RECESSED); THREADED HOLES FOR HUBS REMOVAL; EXPOSED SCREWS CALIBRATED WITH UNF THREAD (PREFERABLY), SAE GRADE 5 (CLASS 8.8) OR EQUIVALENT MATERIAL STANDARD; HEXAGON NUTS (PREFERABLY SELF-LOCKING) W

ELASTIC COUPLING WITH SPLIT RUBBER BAND