कैटलॉग SCHENCK PROCESS

LOAD CELL RTN 33 T 0.05

TOUCH SCREEN CONTROL UNIT MODEL:DISOCONT® TERSUS TYPE:VCU20103 115-230V AC 50W COMPLETE WITH SOFTWARE FOR POWER PLANT GRAVIMETRIC COAL FEEDER

TOUCH SCREEN CONTROL UNIT TYPE:VHM-20100-CF 24V DC 5W MATERIAL NO:V064089.B01 SERIAL NO:EBK-00800 COMPLETE WITH SOFTWARE FOR POWER PLANT GRAVIMETRIC COAL FEEDER

SCHENCK LOAD CELL TYPE RTN1T-C3 -SENSITIVITY 2,85MV / V MAXERROR 0,002% - 4480OHM INPUT RESISTANCE - 4010OHM OUTPUT RESISTANCE - IP68 PROTECTION CLASS WITH 5MT OF CABLE ORDER NO. D726173.02

WEIGHING DISC TYPE WDI 100 T DESIGN WITH 15M CABLE

WEIGH DISC TYPE WDI 25 T-K WITH PLUG WITH 15M CABLE AND PLUG CONNECTOR

LOAD CELL PWS D1 EMAX 150KG, CN 2MV/V

LOAD CELL RTN 2.2T 0.05 EMAX 2.2T, EMIN 0KG ELIM 3.8T

LOAD CELL PWS D1 MAX 30 KG CN 2MV/V

SIDE TENSION PLATE LONG 30 0MM ZARAN

WEIGH DISC WDI 25T-K WITH PLUG WITH 15M CABLE AND PLUG CONNECTOR TYPE DE DISQUE DE PESÉE : MODÈLE 25T-K AVEC CÂBLE DE 15 M

LOAD CELL PWS D1 EMAX=150KG, CN=2MV/V WITHE SUPPORT LEFT SIDE FOR DOSER TYPE MTD-E 1225 T09 CAPTEUR DE FORCE PWS D1 EMAX=150KG, CN=2MV/V AVEC SUPPORT COTÉ GAUCHE POUR DOSEUR TYPE MTD-E 1225 T09

"LOAD CELL PWS D1 EMAX=150KG, CN=2MV/V WITHE SUPPORT RIGHT FOR DOSER TYPE MTD-E 1225 T09 CAPTEUR DE FORCE PWS D1 EMAX=150KG, CN=2MV/V AVEC SUPPORT COTÉ DROIT POUR DOSEUR TYPE MTD-E 1225 T10"

CONTROLLER FRS 0052

300 KG DOSING LOAD CELL TYPE: PWS D1 EMAX: 300 KG CN: 2MV/V

"SCHENCK" TYPE RTN22TC3 CELL - SCHENCK TYPE RTN22TC3 LOAD CELL IN F.C.N. EXECUTION BVD2019DE CODE D724781.02

"SCHENCK" APPARATUS VEG 20450 ELECTRONIC APPARATUS FOR WEIGHT MEASUREMENTS SCHENCK TYPE DISOMAT TERSUS MOD.VEG 20450 DAT. NR.V096001.B11 115/230 VAC 18-36VDC 20VA FAB.NR.0022AUQS FOR 1D LAF LINE BILL (EX B PLUS MOD. VTG 20400)

CONTROLLER INTECONT VEG 20650 / VBW 20650 V082002.B01

CONTROLLER INTECONT VEG 20650 / VBW 20650 V082002.B03

CONTROLLER INTECONT VEG 20650 / VIF 20650 V082005.B01