カタログ JAES

SPRING; INSIDE DIAMETER: .375; OUTSIDE DIAMETER: .75; LENGTH: 2; GALVALOCK DIE SPRING

SEAL FOR ROTARY SHAFT; TYPE: SINGLE LIP WITH SPRING-LOADED METAL INSERT; MATERIAL: MILL RIGHTN NITRILE; SHAFT DIAMETER: 105 MM; HOUSING DIAMETER: 180 MM; THICKNESS: 12MM; SHORE HARDNESS: 70 A / 90 A; FLUID TWO: LUBRICATING OIL AND GREASE; TEMPERATURE RANGE: MAX 80 °C; MAXIMUM PRESSURE: 15 MPA; MANUFACTURING STANDARD: ISO 6194 / DIN 3760

RETAIN; INNER DIAMETER: 150 MM; OUTSIDE DIAMETER: 180 MM; THICKNESS/LENGTH: 14MM; PROFILE TYPE: SINGLE LIP; FLUIDS: GREASE; MATERIAL: NITRILE; SHORE HARDNESS: 70 - 90 A; MAXIMUM WORKING PRESSURE: 7 PSI; TEMPERATURE RANGE: - 40 - 120 °C

RUBBER SEAL INSIDE DIAMETER: 3 1/2; THICKNESS: 1,275; TEMPERATURE RANGE: 70 C; MATERIAL: RUBBER; FLUIDS: WATER; NOMINAL PIPE DIAMETER: 3 1/3; SHAFT DIAMETER 3 1/2; INCHES, DRAWING REFERENCE 10-816-4155, WITH CHANGES IN INSIDE DIAMETER TO 3 1/2;, SLEEVE 4 1/8;, NECK 4 3/8;, OVERALL DIA 15;, RUBBER RADIUS 1/4; , OVERALL THICKNESS 1.275

RETAIN; INNER DIAMETER: 250 MM; OUTSIDE DIAMETER: 280 MM; THICKNESS/LENGTH: 15MM; FLUIDS: GREASE

PLUG - TYPE: HEXAGONAL THREADED MALE; NOMINAL THREAD DIAMETER: 3/8; THREAD TYPE: NPT 3/8 -18; MAXIMUM WORKING PRESSURE: 3000 PSI; MATERIAL: STAINLESS STEEL ASTM A-182 F316; DIMENSIONS ACCORDING TO STANDARD: ANSI B16.11

DRAIN VALVE; TYPE: ESCAPE; THREAD DIAMETER: 1 TPI; FLUID DISCHARGE PRESS URE: 60,000 PSI; PAR60VM9071VALVE ASSEMBLY 20-61

CONICAL BORING; TYPE: CONICAL; MINOR DIAMETER: 9.9 MM; MAJOR DIAMETER: 1 3.4 MM; OVERALL LENGTH: 215 MM; MATERIAL: QUICK YEAR M2; REAMERING FOR PINS DIN 1 AND DIN 7978, CYLINDRICAL ROD, SQUARE STOP, RIGHT CUT; 5501 DIN 9A 10MM; 1:50 P.M.; MANUFACTURER 1: INDACO; N-PART 1: DIN 9 A ? TAPER 1:50 HSS 10 MM

O-RING; INTERNAL DIAMETER: 329.57 MM; THICKNESS: 5.33 MM; MATERIAL: FPM (VITON) BCT-10504 FG.05H

O-RING; INTERNAL DIAMETER: 209.14 MM; THICKNESS: 3.53 MM; MATERIAL: FPM (VITON)

O-RING; INTERNAL DIAMETER: 304.17 MM; THICKNESS: 5.33 MM; MATERIAL: FPM

FIXING CLAMP FOR LIFTING CABLE; CABLE DIAMETER: 3/16 IN; MATERIAL: GALVANIZED FORGED STEEL; STANDARD FF-C-450 TYPE 1 CLASS 1.

HOSE ON A ROLL; TYPE: COIL HOSE NOMINAL INSIDE DIAMETER: 3/8 IN; LENGTH: 100 M MAXIMUM WORKING PRESSURE: 45 PSI; HOSE MATERIAL: PVC; STANDARD: NSF-51

FAN FOR STANDARD 1.5 HP AND 2 HP MOTOR WITH 17MM MOTOR SHAFT DIAMETER AND 170MM EXTERNAL FAN DIAMETER

ELASTIC SPINE; NOMINAL DIAMETER: 10 MM; LENGTH: 65MM; DIMENSIONS ACCORDING TO STANDARD: ISO 8752; MATERIAL STANDARD: SPRING STEEL DIN 17225

SAUCER SPRING; OUTSIDE DIAMETER: 25 MM; INTERNAL DIAMETER: 12.2 MM; THICKNESS: 1.5MM; HEIGHT: 2.05MM; STANDARD: EN16983; SPRING WASHER DIN EN 16983 25X12.2MM

CYLINDRICAL BRUSH; DIAMETER: 26MM; BRUSH LENGTH: 45 MM; OVERALL LENGTH: 70 MM; MATERIAL: NYLON; WIRE GAUGE: 0.25 MM; CABLE SHAPE: RE TWISTED; HANDLE TYPE: TWISTED WIRE; DRAWING NUMBER: TM19-M-CUT01 -0012968;ØA=26;

TAP HOLDER FOR THREADING BY HAND; MIN DIAMETER THREAD: 7MM; MAXIMUM THREAD DIAMETER: 18 MM; NUMBER 3

WITTMANN-WATER FLOW REGULATOR SERIES 110 DFR-110:3/8,SO-S NO. OF CIRCUITS: 4-ZONES WITHOUT THERMOMETER MOLD CONNECTION: BRASS THREADED SLEEVE G3/8" FLOW RANGE: 0 - 10 L/MIN PER CIRCUIT TEMPERATURE: MAX. 100°C AT 4BAR PRESSURE: MAX. 10BAR AT 40°CSPECIAL-S: WATER SUPPLY/RETURN: G 1/2

HOSE TYPE: CHEMICAL INSIDE DIAMETER: 125MM OUTSIDE DIAMETER: 135MM LENGTH: 1000MM