カタログ JAES

GEAR COUPLINGS; TYPE: GO-6ARR AGMA FLANGE 4; INTER.-CUBO 1 DIAMETER: 1 10 H7 MM; INTER.-CUBO 2 DIAMETER: 110 M7 MM; LENGTH: 298 MM; MAXIMUM EXT ERNAL DIAMETER: 312 MM; REFERENCE DRAWING: 4069-02-DAJ-914-003-01; DRAWI NG NUMBER: 4069-02-DAJ-914-003-01; KEY SEATS MUST BE PERFECTLY ALIGNED WITH ONE TOOTH AND ONE BOLT

COUPLING OUTSIDE DIAMETER: 2-5/8 IN LENGTH: 3-1/2IN MATERIAL: TGP STEEL

REGULATOR FOR AIR AND GAS; USE: REFRIGERANT GASES R12, R22 AND R134; THREADED CONNECTION; MANIFOLD FEATURES: SWING BRACKET, HIGH AND LOW DIAM. MANOMETERS. 63 MM, SIDE SHUT-OFF VALVES AND STEM WITH ADJUSTABLE GLAND, PRESSURE SCALE FOR REFRIGERANT GASES R12, R22 AND R134 EXPRESSED IN POUNDS / INCHES² AND BAR, TEMPERATURE SCALE IN °C, CONNECTIONS /4 MALE FLARE, SET OF 90 CM HOSES; NOMENCLATURE: 536_R12-22-134 2 (MODEL 536 FOR REFRIGERANT GASES R12-R22- AND R134. HAS 2 HIGH AND LOW PRESSURE MANOMOMETERS)

BALL VALVE; NOMINAL SIZE: 2 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: ACIDS, AND WATER. TEMPERATURE RANGE: 0 TO 80 ºC DIAL MATERIAL: ECTFE (ETHYLENE CHLOROTRIFLUORETHYLENE); CUE RPO MATERIAL: POLYPROPYLENE; STEP TYPE: TOTAL; PRESSURE: CLASS 150; V ITON O RING; TEFLON SEAT AND DIAL; LEVER OPERATION TYPE; THE VALVE SHOULD BE PROVIDED WITH THE LOCKING DEVICE – SUITABLE FOR USING PADLOCK WITH NOMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

FERRULE; OUTER TUBE DIAMETER: 5/8 IN; DIMENSIONS ACCORDING TO STANDARD: SAEJ 514 TYPE 080115A; NOMINAL DIAMETER: 5/8 "; WILL BE DELIVERED PACKED IN CARDBOARD BOXES AND PROTECTED AGAINST HITS AND DIRTY FROM TRANSPORTATION AND STORAGE

ADAPTER; TYPE: STRAIGHT TUBE-TUBE; OUTER DIAMETER TUBE: 10 MM; THREAD TYPE L1: M18X1.5; L2 THREAD TYPE: M18X1.5; MATERIAL: BRONZE

POLYETHYLENE OR PLASTIC BOTTLE; APPLICATION: OIL SAMPLING FOR LUBRICANT ANALYSIS; CAPACITY FROM 100 TO 130 ML (4 TO 5 OUNCES), THREAD DIAMETER ON THE LID 38 MM, MAXIMUM OUTER DIAMETER 53 MM, MINIMUM THICKNESS OF PAIR ED 0.8 MM. INCLUDES THE LID, THEY MUST BE SUPPLIED CLOSED, FREE OF PLASTIC BURRS AND/OR IMPURITIES, CLEAN - LESS THAN 100 PARTICLES >10 MICR ONS/ML. THE COMMERCIAL PRESENTATION MUST BE IN A SEALED PLASTIC BAG WITH 20 PCS.

THERMOELEMENT ART NRO: T033496 PROVEEDOR: CONATEX FORM F - 22/16 MM. MATERIAL NO. 1.4841 NECK TUBE LENGTH IN MM: 200 FASTENING: BLIND FLANGE DN25 PN40 CONNECTION HEAD SHAPE: BUZH INSTALLATION LENGTH IN MM: 800 TO LOWER EDGE OF FLANGE MEASURING INSERT: 1XNICR-NI (K) MEASURING INSERT DIAMETER IN MM: 3.0 TOLERANCE CLASS 1 ACCORDING TO DIN EN 60584-2 MEASURING INSERT LENGTH IN MM: 1025 WITH HART TRANSMITTER TYPE C090211A MOUNTED IN THE CONNECTION HEAD COVER

NON-RETURN VALVE -DN150 PN16- DIAMETER CENTER OF HOLES MM.240 - N.8 HOLES - GAUGE BETWEEN THE FLANGES 485 -STAINLESS STEEL BOLTS

THERMORESISTANCE; TYPE: PT100; SHEATH DIAMETER: 6.4 MM; TOTAL LENGTH OF THE SHEATH: 350 MM; SHEATH MATERIAL: CED STAINLESS STEEL. 304; CONNECTION TYPE: NPT; SINGLE ELEMENT RTD - PT100 OHM AT 0°C - 3 WIRE CONNECTION. MGO INSULATION RANGE: 0 ÷ 80 ° C AISI 316 SHEATH OD 6.4 MM, AISI 316 THERMOWELL BAR STOCK, PROC. CONN. 3/4"M THRD. NPT, NOZZLE AISI316 L = 100 MM, DIN 43760 C LASE B, IEC 751, HEAD B, EL. CONN.1 / 2" NPT, F-F COUPLING AISI316 1/2 "-3/4 LENGTH U 350 MM

SCREW; TYPE: SOCKET CAP SCREW; THREAD NOMINAL DIAMETER: 24 MM; THREAD TY PE: M24-3.00; LENGTH: 300 MM; THREAD LENGTH: 60 MM; SCREW NORM: CLASS 12 .9; MATERIAL: BLACK OXIDE FINISH STEEL; MECHANICS PROPERTIES TYPE: DIN 9 12

SCREW; TYPE: HEX HEAD CAP SCREW; THREAD NOMINAL DIAMETER: 20 MM; THREAD TYPE: M20-2.50; LENGTH: 100 MM; THREAD LENGTH: 100 MM; SCREW NORM: CLASS 10.9; MATERIAL: BLACK OXIDE FINISH STEEL; MECHANICS PROPERTIES TYPE: DIN 933

SCREW; TYPE: HEX HEAD CAP SCREW; THREAD NOMINAL DIAMETER: 24 MM; THREAD TYPE: M24-3.00; LENGTH: 130 MM; THREAD LENGTH: 60 MM; SCREW NORM: CLASS 10.9; MATERIAL: BLACK OXIDE FINISH STEEL; MECHANICS PROPERTIES TYPE: DIN 931

SCREW; TYPE: HEX HEAD CAP SCREW; THREAD NOMINAL DIAMETER: 24 MM; THREAD TYPE: M24-3.00; LENGTH: 260 MM; THREAD LENGTH: 73 MM; SCREW NORM: CLASS 10.9; MATERIAL: BLACK OXIDE FINISH STEEL; MECHANICS PROPERTIES TYPE: DIN 912