GEAR COUPLINGS; TYPE: GO-6ARR AGMA FLANGE 4; INTER.-CUBO 1 DIAMETER: 1 10 H7 MM; INTER.-CUBO 2 DIAMETER: 110 M7 MM; LENGTH: 298 MM; MAXIMUM EXT ERNAL DIAMETER: 312 MM; REFERENCE DRAWING: 4069-02-DAJ-914-003-01; DRAWI NG NUMBER: 4069-02-DAJ-914-003-01; KEY SEATS MUST BE PERFECTLY ALIGNED WITH ONE TOOTH AND ONE BOLT
BRUSH; HEIGHT: 45MM; WIDTH: 32MM; TOTAL THICKNESS: 16 MM; SEE DRAWING 8211-22-0002; BRUSH FOR BULL ELECTRIC 225 KW MOTOR FOR S & P CRANE TROLLEY
IN-LINE MOUNT NON-RETURN VALVE; TYPE: CLAPPER; CLASS: CLASS 150 NOMINAL SIZE: 2 IN; MOUNTING TYPE: BSPT THREADED ACCORDING TO DIN 2999; FLUI TWO: WATER, AIR, OIL. MAXIMUM TEMPERATURE 400°F (204°C); SHAPE: STRAIGHT; WORKING POSITION: HORIZONTAL / VERTICAL WITH UPWARD FLOW; BODY MATERIAL: BRONZE; RETENTION MECHANISM MATERIAL: BRONZE; DIMENSIONS ACCORDING TO STANDARD: MSS-SP-80; BODY AND LID MATERIAL: BRONZE ASTM B 62; RETENTION MECHANISM: CLAPPER; CONSTRUCTION FORM: STRAIGHT TYPE 3 SE GUN MSS-SP-80; CLAPPER MATERIAL: BRONZE; SEAT MATERIAL: BRO NCE; CLASS 150 ;WORK POSITION: HORIZONTAL; DESIGN STANDARD FOR BRONZE VALVES, WALL THICKNESS AND CLASSES (PRESSURE/TEMPERATURE) ACCORDING TO MSS-SP-80; STANDARD FOR TESTING API 598; BSPT THREADED ENDS
IN-LINE MOUNT NON-RETURN VALVE; TYPE: CLAPPER; CLASS: CLASS 150 NOMINAL SIZE: 3 IN; MOUNTING TYPE: FLANGES ACCORDING TO ANSI B16.5; FLUIDS: WATER, OIL, AND GASES. NON-CORROSIVE FLUIDS, TEMPERATURE RANGE -20°F (-30°C) TO +800°F (+425°C); SHAPE: STRAIGHT; WORKING POSITION: H ORIZONTAL / VERTICAL WITH UPWARD FLOW; BODY MATERIAL: CAST BOND CARBON STEEL; RETENTION MECHANISM MATERIAL: STAINLESS STEEL; DIMENSIONS ACCORDING TO STANDARD: API 600, ASME B16.34; BODY AND LID MATERIAL: CAST CARBON STEEL ASTM A-216 GRADE WCB; CLAPPER MATERIAL STANDARD: ASTM A 296 GRADE CA15 STAINLESS STEEL; SEAT MATERIAL: STELLITE; DESIGN STANDARD FOR FLANGED CAST STEEL VALVES API 600, WALL THICKNESS AND CLASSES (PRESSURE TEMPERATURE RELATIONSHIP) ACCORDING TO ASME B16.34, API 600; DISTANCE BETWEEN FACES ACCORDING TO ANSI B16.10; STANDARD FOR TESTING API 598
REPLACEMENT PARTS FOR DIVERTER DAMPERS ACCORDING TO DRAWING SS.ACE.MET1.ASEC-PBA-D-210195-M_01. INCLUDE ONLY THE FOLLOWING ITEMS: - 4A: BLADE AND SHAFT ASSEMBLIES (QTY: 1) - 4B: SHAFT SEAL ASSEMBLIES (QTY: 2) - 4C: ACTUATOR LEVER (QTY: 1) - 5A: POSITIONER INSTALATION (QTY: 1) - 1: ACTUATOR CYLINDER (QTY: 1) - 2: BEARING (QTY: 2) - 4: COLLAR (QTY: 2) NOTE: PROVIDE AS SHOWN IN THE DRAWING
REPLACEMENT PARTS FOR DIVERTER DAMPERS ACCORDING TO DRAWING SS.ACE.MET1.ASEC-PBA-D-210195-M_01. INCLUDE ONLY THE FOLLOWING ITEMS: - 4A: BLADE AND SHAFT ASSEMBLIES (QTY: 1) - 4B: SHAFT SEAL ASSEMBLIES (QTY: 2) - 4C: ACTUATOR LEVER (QTY: 1) - 5A: POSITIONER INSTALATION (QTY: 1) - 1: ACTUATOR CYLINDER (QTY: 1) - 2: BEARING (QTY: 2) - 4: COLLAR (QTY: 2) NOTE: PROVIDE OPPOSITE HAND TO DRAWING
PNEUMATIC PAINTING GUN AND TORCH; SUPPORT TYPE: PORTABLE; TANK VOLUME: 400 CM3; ANTIGRAVITY PAINT GUN; AIR, FLUID AND FAN FLOW REGULATORS; WITH ANTI-DRIP AND PRODUCT FILTER; 1.5MM NOZZLE; AIR CONSUMPTION 40 PSI ; AIR INLET 1/4" NPT MALE; CUP CAPACITY 400CC
SEAT FOR PH PURGE VALVE (L.B.) ATTACH CHEMICAL COMPOSITION PROTOCOL; MENSIONAL DI CONTROL AND HARDNESS TEST PACKAGING: SUPPLY WITH ANTI-CORROSION PROTECTION VAT SUPPLY WITH ANTI-CORROSO PROTECTION VAT DRAWING: DM1551264
COUPLING; FLEXMASTER 3 " FLEXIBLE COUPLING FOR SULLAIR COMPRESSOR; CORRESPONDS TO COMPRESSOR MODEL O: 20/16-175; COMPRESSOR SERIAL NUMBER: 3542/3402/3503/3502
1378019
(在庫あり)
MECHANICAL ELEMENT FOR SPECIAL MACHINE; COMPONENT: GRIPPER; MACHINE: U AND V ROBOTS, INTERNAL CELLS 4 AND 5;
REGULATOR FOR AIR AND GAS; USE: REFRIGERANT GASES R12, R22 AND R134; THREADED CONNECTION; MANIFOLD FEATURES: SWING BRACKET, HIGH AND LOW DIAM. MANOMETERS. 63 MM, SIDE SHUT-OFF VALVES AND STEM WITH ADJUSTABLE GLAND, PRESSURE SCALE FOR REFRIGERANT GASES R12, R22 AND R134 EXPRESSED IN POUNDS / INCHES² AND BAR, TEMPERATURE SCALE IN °C, CONNECTIONS /4 MALE FLARE, SET OF 90 CM HOSES; NOMENCLATURE: 536_R12-22-134 2 (MODEL 536 FOR REFRIGERANT GASES R12-R22- AND R134. HAS 2 HIGH AND LOW PRESSURE MANOMOMETERS)
BALL VALVE; NOMINAL SIZE: 2 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: ACIDS, AND WATER. TEMPERATURE RANGE: 0 TO 80 ºC DIAL MATERIAL: ECTFE (ETHYLENE CHLOROTRIFLUORETHYLENE); CUE RPO MATERIAL: POLYPROPYLENE; STEP TYPE: TOTAL; PRESSURE: CLASS 150; V ITON O RING; TEFLON SEAT AND DIAL; LEVER OPERATION TYPE; THE VALVE SHOULD BE PROVIDED WITH THE LOCKING DEVICE – SUITABLE FOR USING PADLOCK WITH NOMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM
TURBINE PUMP (CENTRIFUGAL); MAXIMUM WORK PRESSURE 6 BAR; FLOW: 4 M3/HR; MOUNTING TYPE: IMMERSIONE; FLUIDS: OIL - WATER; PUMP FOR MOVING GLYCOL FOR COOLING LATHES EMAG
POLYETHYLENE OR PLASTIC BOTTLE; APPLICATION: OIL SAMPLING FOR LUBRICANT ANALYSIS; CAPACITY FROM 100 TO 130 ML (4 TO 5 OUNCES), THREAD DIAMETER ON THE LID 38 MM, MAXIMUM OUTER DIAMETER 53 MM, MINIMUM THICKNESS OF PAIR ED 0.8 MM. INCLUDES THE LID, THEY MUST BE SUPPLIED CLOSED, FREE OF PLASTIC BURRS AND/OR IMPURITIES, CLEAN - LESS THAN 100 PARTICLES >10 MICR ONS/ML. THE COMMERCIAL PRESENTATION MUST BE IN A SEALED PLASTIC BAG WITH 20 PCS.
THERMOELEMENT ART NRO: T033496 PROVEEDOR: CONATEX FORM F - 22/16 MM. MATERIAL NO. 1.4841 NECK TUBE LENGTH IN MM: 200 FASTENING: BLIND FLANGE DN25 PN40 CONNECTION HEAD SHAPE: BUZH INSTALLATION LENGTH IN MM: 800 TO LOWER EDGE OF FLANGE MEASURING INSERT: 1XNICR-NI (K) MEASURING INSERT DIAMETER IN MM: 3.0 TOLERANCE CLASS 1 ACCORDING TO DIN EN 60584-2 MEASURING INSERT LENGTH IN MM: 1025 WITH HART TRANSMITTER TYPE C090211A MOUNTED IN THE CONNECTION HEAD COVER