カタログ SALISBURY

PROTECTIVE GLOVE; APPLICATION: ELECTRICAL WORK UP TO 7500V; MATERIAL: INSULATING RUBBER UP TO 7500 VAC; SIZE/MEASUREMENT: 10; COMPLIES WITH THE IEC 60903 STANDARD. FOR ARGENTINA IT MUST HAVE THE S STAMP

PROTECTIVE GLOVE; APPLICATION: AGAINST ARC FLASH; SIZE/MEASUREMENT: ONE SIZE; CLASSIFICATION 31 CAL/CM2, KING BLUE COLOR. THESE GLOVES ARE SEWN WITH NOMEX THREAD, THEY HAVE A 9 OZ./YD2 (305 G/M²) SEF (SELF EXTINGUISHING FIBER?) MODACRYLIC COATING, 1 LAYER OF 7 OZ./YD2 (237 G/M²) OUTER LAYER 88 % COTTON / 12%

PROTECTIVE GLOVE; APPLICATION: AGAINST ARC FLASH; SIZE/MEASUREMENT: ONE SIZE; CLASSIFICATION 100 CAL/CM2, KHAKI COLOR. THESE GLOVES ARE SEWN WITH NOMEX THREAD, THEY HAVE A MODACRYLIC COATING OF 9 OZ./YD2 (305 G/M²) SEF (SELF EXTINGUISHING FIBER?), 10 OZ./YD2 (339 G/M2) TUFFWELD, 2 LAYERS OF COATING 9.4 OZ./YD2 (319 G/M2) Q9, OUTER LAYER 88% A COTTON / 12%

PROTECTIVE GLOVE; APPLICATION: FOR HIGH VOLTAGE HANDLING; MATERIAL: RUBBER; SIZE/MEASUREMENT: 9; TECHNICAL SPECIFICATIONS: INSULATED GLOVES FOR HIGH VOLTAGE, CLASS 2, TYPE 1; VOLTAGE 20 KV; MAXIMUM VOLTAGE 17000 V AC, SIZE 9; GRIST ST, COLOR B, MANUFACTURED AND TESTED ACCORDING TO ANSI/ASTM D120; RC CATEGORY, SERIAL #2029245 MODEL: CLASS 2, 20 KV

PROTECTIVE GLOVE; APPLICATION: AGAINST ARC FLASH; SIZE/MEASUREMENT: ONE SIZE; CLASSIFICATION 40 CAL/CM2, GRAY COLOR. THESE GLOVES ARE TWO SEWN WITH NOMEX THREAD, THEY HAVE A 9 OZ./YD2 (30 5 G/M²) SEF (SELF EXTINGUISHING FIBER?) MODACRYLIC COATING, 1 LAYER OF 13 OZ./YD2 (441 G/M2) AND 1 5.5 OZ./YD2 LAYER (186 G/M2) OUTER LAYER 88% COTTON / 12%

MASK FOR PROTECTION; TYPE: MASK FOR ELECTRICAL USE; DESCRIPTION: 7.5"X20" VISION AREA, 0.06" THICK, ABSORBS OVER 99% OF UV RAYS, FOG RESISTANT, MEETS CURRENT NSI Z87.1, CSA STANDARDS, AND TESTED TO SPECIFICATIONS ASTM F2178; CONSTITUTED: MASK FOR FIXING ON A HELMET FOR PROTECTION AGAINST ARC FLASH WITH TRANSLUCENT CHIN GUARD (AS1200 CLR) AND FIXING CLIPS TO THE HELMET

PROTECTIVE GLOVE; APPLICATION: MECHANICAL PROTECTION OF DIELECTRIC GLOVE; MATERIAL: INDURA ULTRA SOFT/NOMEX; SIZE/MEASUREMENT: 11; ARC FL ASH CAT II GLOVE FOR ELECTRICAL USE; ARC FLASH PROTECTION HRC II CATEGORY (8 CAL /CM2) ACCORDING TO NFPA 70E

PROTECTIVE GLOVE; APPLICATION: FOR LOW VOLTAGE HANDLING; MATERIAL: NATURAL RUBBER TYPE 1; SIZE/MEASUREMENT: 10; CLASS 00 DIELECTRIC GLOVE SUITABLE FOR WORK UP TO 500 VAC ACCORDING TO ASTM D120 AND IEC EN60903. - FOR ARGENTINA, THE "S" STAMP IS REQUIRED FROM THE UNDERSECRETARY OF COMMERCE AND CONSUMER DEFENSE SA

PROTECTIVE GLOVE; APPLICATION: FOR HIGH VOLTAGE HANDLING; MATERIAL: RUBBER; SIZE/MEASUREMENT: 8; TECHNICAL SPECIFICATIONS: INSULATED GLOVES FOR HIGH VOLTAGE, CLASS 2, TYPE 1; VOLTAGE 20 KV; MAXIMUM VOLTAGE 17000 VAC, SIZE 8; GRIST ST, COLOR B, MANUFACTURED AND TESTED ACCORDING TO ANSI/ASTM D120; CATEGORY RC, SERIOUS #2029245

HOOD; MATERIAL: LENZING KEVLR; SIZE/MEASUREMENT: ONE SIZE

OTHER TYPE DETECTOR; 1 TESTER 4744 240 V AT 69 KV, WITH URD TEST POINT SCALE 15, 25, 35KV, 1 CASE 4315, 1 ADAPTER FOR POLE 2500

PROTECTIVE GLOVE; APPLICATION: DIELECTRIC GLOVE MECHANICAL PROTECTION; MATERIAL: LEATHER; SIZE: 10; ARC FLASH PROTECTION CATEGORY HRC II ACCORDING TO NFPA 70E. - FOR ARGENTINA, THE "S" SEAL OF THE UNDERSECRETARY OF COMMERCE AND CONSUMER DEFENSE IS REQUIRED

PROTECTIVE GLOVE; APPLICATION: DIELECTRIC GLOVE MECHANICAL PROTECTION; MATERIAL: LEATHER; SIZE: 9.5; ARC FLASH PROTECTION CATEGORY HRC II ACCORDING TO NFPA 70E. - FOR ARGENTINA, THE "S" SEAL OF THE UNDERSECRETARY OF COMMERCE AND CONSUMER DEFENSE IS REQUIRED

PROTECTIVE GLOVE; APPLICATION: DIELECTRIC GLOVE MECHANICAL PROTECTION; MATERIAL: LEATHER; SIZE: 8.5; ARC FLASH PROTECTION CATEGORY HRC II ACCORDING TO NFPA 70E. - FOR ARGENTINA, THE "S" SEAL OF THE UNDERSECRETARY OF COMMERCE AND CONSUMER DEFENSE IS REQUIRED

PROTECTIVE GLOVE; APPLICATION: DIELECTRIC GLOVE MECHANICAL PROTECTION; MATERIAL: LEATHER; SIZE/MEASUREMENT: 9; ARC FLASH PROTECTION CATEGORY HRC II ACCORDING TO NFPA 70E. - FOR ARGENTINA, THE "S" SEAL OF THE SUB SECRETARIAT OF COMMERCE AND CONSUMER DEFENSE IS REQUIRED

PROTECTIVE GLOVE; 17,000-VOLT DIELECTRIC GLOVE KIT. INCLUDES A ONE-SIZE-FITS-ALL COTTON GLOVE, A 16" LONG CLASS 2 DIELECTRIC GLOVE, SIZE 9, MODEL E216YB/09, AND A SIZE 10 LEATHER GLOVE - ILPG5S 10-E216YB/09