Catalogus JAES


ZOEK UW PRODUCT IN DE CATALOGUS

 
 

STANDARD GASKET FOR 2"1/2 S HURJOINT RIGID JOINT, 76M EPDM MATERIAL

Info / Vraag om prijs

STANDARD GASKET FOR RIGID JOINT S "3" HURJOINT", MATERIAL EPDM 89 MM, PRODUCT SAYS SG05E0030

Info / Vraag om prijs

STANDARD GASKET FOR RIGID JOINT S "6" HURJOINT", MATERIAL EPDM 168 MM, PRODUCT ODE SG05E0065

Info / Vraag om prijs

SEAL KIT; CLOSURE TYPE: GASKET KIT; FLUIDS: OIL; MATERIAL: VITON; MAXIMUM WORKING PRESSURE: 250 BAR; TEMPERATURE RANGE : 220°C TO -30°C

Info / Vraag om prijs

NEEDLE CASE WITH NUT AND FERRULE NDLE-XFERGAS SLV 4551/4551A/1051

Info / Vraag om prijs

REGULATOR FOR AIR AND GAS; USE: REFRIGERANT GASES R12, R22 AND R134; THREADED CONNECTION; MANIFOLD CHARACTERISTICS: OSCILLATING SUPPORT, HIGH AND LOW DIAM MANOMETERS. 63 MM, SIDE SHUT-OFF VALVES AND STEM WITH ADJUSTABLE PACK GLAND, PRESSURE SCALE FOR R12, R22 AND R134 REFRIGERANT GASES EXPRESSED IN POUNDS / IN² AND BAR, TEMPERATURE SCALE IN °C, MALE /4 FLARE CONNECTIONS, SET OF 90 CM HOSES; NOMENCLATURE: 536_R12-22-134 2 ( MODEL 536 FOR REFRIGERANT GASES R12-R22- AND R134. IT HAS 2 GAUGES. HIGH AND LOW PRESSURE)

Info / Vraag om prijs

WG320240A-FMC-VZ

(Op voorraad)

GRAPHIC DISPLAY 320 X 240 PIXELS; EQUIPMENT BELONGING: GAS ANALYZERS ES ABB; THE PROVISION MUST BE INCLUDED: CONNECTOR FOR FLAT CABLE CODE 2323R-14A

Info / Vraag om prijs

GASKET; INTERNAL DIAMETER: 358 MM; OUTSIDE DIAMET ER: 440 MM; THICKNESS/LENGTH: 4.8 MM; PROFILE TYPE: FLANGE; FLUIDS: GREA SE; MATERIAL: NEOPRENE REINFORCED; SHORE HARDNESS: 60 A; DRAWING NUMBER: V05128 REV. 01;V05113 REV. 06;34; PQF 4-6 STAND

Info / Vraag om prijs

ROS6-04024000-424

(Op voorraad)

GASKET ROS6-04024000-424.14310

Info / Vraag om prijs

ROS6-04022420-424

(Op voorraad)

PAKKING ROS6-04022420-424.14310

Info / Vraag om prijs

WAFER FLAT BODY VALVE TYPE:S10 DN50 PN16/40 - FOR NATURAL GAS

Info / Vraag om prijs

20/60 MBAR-4KG/H

(Op voorraad)

GAS CYLINDER PRESSURE REGULATOR

Info / Vraag om prijs

PROVISION OF PARTS AND SPARE PARTS FOR OXYGAS BURNER USED IN THE HDG2 FURNACE CANNING PLANT: INCLUDES: BURNER BODY, FASTENING FLANGE, AIR DIFFUSER AND GAS INJECTOR TUBE. IT HAS CONNECTION NIPPLES FOR COMBUSTION GAS AND OXYGEN. MOUNTING PLATE CORRESPONDS TO THE FLANGE THAT FIXES THE BURNER BODY TO THE METAL STRUCTURE OF THE OVEN NATURAL GAS INJECTION NOZZLE TWO MACHINED CANNULA WITH CALIBRATED PITCH; PROVISION IN: REFRACTORY STAINLESS STEEL AISI 310 AND INCONEL 601. SEAL GARNISHES KIT OF SEAL GASKETS FOR 1 BURNER. DELIVER PACKAGED AND IDENTIFIED

Info / Vraag om prijs

40-01591

(Op voorraad)

SERRATED GASKET CLASS1500, NPS 3/4" MATERIAL: STEEL, LOCATIN G SURFACE WITH GRAPHITE ON BOT H SIDES, 0,5 MM

Info / Vraag om prijs

GASKET-BONNET DWG.704651-3/9 G SO69057 4N11FV1-2 14556 TYPE 1 000 S/N 704851-3 P.O. 460148 P M

Info / Vraag om prijs

STRAIGHT FITTING D 1/4" GAS THREAD 19 WIRE

Info / Vraag om prijs

LAMP; TYPE: QUARTZ, FLOODLIGHT; POWER: 500 W; VOLTAGE: 120 V; BASEBOARD TYPE: RECESSED SINGLE CONTACT; BULB DIAMETER: 0.375 "; TOTAL LENGTH: 4-11/16 "; BULB TYPE: T3; COLOR: CLEAR; LUMENS: 8750; AVERAGE RATED LIFE (HR): 2000 HR; CLASS C (GAS); CRI: 100; COLOR TEMP ERATURE/CCT (K): 2950; FILAMENT: C-8

Info / Vraag om prijs

ENGINE REPAIR BOT CAT INTERNAL ID S0600005 RPKU1C020-04140 / TIMING SEAL RPKU17381-04460 / BASE SEAL V3300 RPBO7000769 / COMB CUT-OFF SOLENOID RPKU1G772-14520 / VALVE COVER GASKET RPKU1G777 -65512 / GLOW PLUG

Info / Vraag om prijs

ZOEK UW PRODUCT IN DE CATALOGUS