Catalogus HONEYWELL

ACTUATOR: 43191680-102 DUAL AUX SW. FOR ML6421- /ML7421 DCA'S IN 24 VAC APPLICATIONS ONLY. NOT - RATED FOR LINE VOLTAGE W ITH THESE ACTUATORS IN - USA.

ADAPTER BRACKET: M7284C1000 MODUTROL IV MOTOR BY HONEYWELL IS A NON-SPRING RETURN MOTOR USED TO CONTROL DAMPERS AND VALVES. MOTORS ACCEPT A CURRENT OR VOLTAGE SIGNAL FROM AN ELECTRONIC CONTROLLER TO POSITION A DAMPER OR VALVE AT ANY POINT BETWEEN OPEN AND CLOSED.

CARTRIDGE: VCZZ1400 REPLACEMENT CARTRIDGE FOR 2 WAY ON/OFF VALVES EQUAL PERCENTAGE FLOW CHARACTERISTIC, USED W/ PROPORTIONAL ACTUATORS.

CONDUIT: 803867A CONDUIT COVER FOR LINE VOLTAGE USE OF END SWITCH ON V8043F

CONTROL PANEL: HZ311 TRUEZONE ZONE CONTROL PANEL. CONTROLS THREE ZONES OF SINGLE STAGE HEAT AND COOL CONVENTIONAL HVAC EQUIPMENT.

CONTROLLER: C7232A1008 CARBON DIOXIDE (CO2) SENSORS BY HONEYWELL ARE STAND-ALONE CARBON DIOXIDE (CO2) SENSORS FOR USE IN DETERMINING VENTILATION NECESSITY WITH HVAC CONTROLLERS. SENSOR MEASURES CO2 CONCENTRATION IN VENTILATED SPACE OR DUCT. SENSORS ARE USED IN VENTILATION AND AIR CONDITIONING SYSTEMS TO CONTROL AMOUNT OF FRESH OUTDOOR AIR SUPPLIED TO MAINTAIN ACCEPTABLE LEVELS OF CO2 IN SPACE. LCD THAT PROVIDES SENSOR READINGS AND STATUS INFORMATION. NON-DISPERSION-INFRARED (NDIR) TECHNOLOGY USED TO MEASURE CARBON DIOXIDE GAS. GOLD-PLATED SENSOR PROVIDES LONG-TERM CALIBRATION STABILITY. C7232 PROVIDES VOLTAGE OR CURRENT OUTPUT BASED ON CO2 LEVELS. SPST RELAY OUTPUT. USED FOR CO2 BASED VENTILATION CONTROL (DEMAND CONTROL VENTILATION (DCV)). AUTOMATIC BACKGROUND CALIBRATION (ABC) ALGORITHM BASED ON LONG-TERM EVALUATION REDUCES REQUIRED TYPICAL ZERO-DRIFT CHECK MAINTENANCE.

CONTROLLER: RM7897C1000 CONTROLLER. 120 V, 50/60 HZ. INTERRUPTED PILOT VALVE TERMINAL, 2ND STAGE MAIN VALVE FOR LOW HIGH LOW SYSTEMS. PROGRAMMABLE POST PURGE TIMING AND BLINKUM FAULT ANNUCIATION.

FACEPLATE: T6052A1023 RANGE 10 TO 25C SLOTTED COVER AND EXTRA FACEPLATE FOR HORIZ OR VERT MNT. BILINGFRENCH STAGE 1 COOL.

GLOBE VALVE: VGF31EM30 3" CV=100 FLANGED GLOBE VALVE, THREE-WAY MIXING, EQUAL PERCENTAGE, ANSI-125

LINE VOLTAGE THERMOSTAT: T6051A1016 HEAVY DUTY LINE VOLTAGE THERMOSTATS BY HONEYWELL ARE USED TO CONTROL FAN COILS, FANS, MOTOR STARTERS, VALVES, CONTACTORS, AND CIRCULATOR MOTORS IN HEATING AND/OR COOLING SYSTEMS. • PROVIDE GOOD LINE VOLTAGE COMFORT CONTROL. • USE WITH Q651A,B SUBBASES FOR SYSTEM AND FAN SWITCHING. • REMOVABLE SETPOINT KNOB LOCKS SETPOINT AND PREVENTS TAMPERING. • WITH LOCKING COVER.

LINE VOLTAGE THERMOSTAT: T6051A1057 TRADELINE. LINE VOLTAGE THERMOSTAT HEAVY DUTY HEAT/COOL. 120/240V CONTROL. RANGE 10-25C HORIZONTAL OR VERTICAL MOUNT.

METER: H46D1214 TRADELINE LINE VOLTAGE HUMD. CNTRL(WITHOUT HYGROMETER). 10 TO 60% RH RANGE.INCLUDES POS. OFF & POS. ON POSITIONS PREMIER WHITE.

MODUTROL MOTOR: M8185D1006 MODUTROL MOTOR 60 LB-IN, SR ACTUATOR, TWO POSITION, LOW VOLTAGE, 24V

MOTORIZED ZONE VALVE: V8043A1003 1/2" FLARE (5/8 SAE NUT/JOINT). LOW VOLTAGE MOTORIZED ZONE VALVE.

MOTORIZED ZONE VALVE: V8043A1011 1/2" SWEAT. LOW VOLTAGE MOTORIZED ZONE VALVE.

MOTORIZED ZONE VALVE: V8043A1029 3/4" SWEAT. LOW VOLTAGE MOTORIZED ZONE VALVE.

MOTORIZED ZONE VALVE: V8043A1037 1" SWEAT. LOW VOLTAGE MOTORIZED ZONE VALVE.

MOTORIZED ZONE VALVE: V8043A1193 1/2" INVERTED FLARE. PURCHASE UNION FITTINGS SEPARATELY. 1/2" SWEAT, 272708A OR 3/4" SWEAT, 272708B. LOW VOLTAGE MOTORIZED ZONE VALVE.

MOTORIZED ZONE VALVE: V8043A1227 1/2" NPT. 24V 1/2 IN. NPT CONNECTION LOW VOLTAGE MOTORIZED ZONE VALVE WITH 3.5 CV CAPACITY

MOTORIZED ZONE VALVE: V8043A5011 1/2" SWEAT, 3.5CV, 20 PSI CLOSE-OFF. LOW VOLTAGE MOTORIZED ZONE VALVE.