Katalóg Crosby

UNION LINK; MAXIMUM WORK LOAD 59700 LB APPLICABLE CHAIN IF TYPE A1337 LOK-A-LOY BRAND 1 CROSBY N-PART 1 101517 2

UNION LINK MAXIMUM WORK LOAD 59700 LB APPLICABLE CHAIN IF TYPE A1337 LOK-A-LOY BRAND 1 CROSBY N-PART 1 101517 2

PIN

SHACKLE, TYPE SCREW PIN ANCHOR, MAXIMUM WORK LOAD 3250 KG, NOMINAL SIZE 5/8', SECTION 1.69X2.94X4.19', MAXIMUM OPENING 1.06'.

SHACKLE, MAXIMUM WORK LOAD 4750 KG, NOMINAL SIZE 3/4', SECTION 2X3.5X4.97', MAXIMUM OPENING 1,25'.

TESNENIE

WEDGE SOCKET ASSEMBY /GROSBY 1035009/ROPE 12 MM

OPEN WEDGE SOCKET MODEL S-421

REŤAZ

CLAMP WIRE ROPE U-BOLT 2.1/2IN

KÁBEL

SECONDARY WHEEL D80/200X56.5 S/P PAAB7357A

CLAMP WIRE ROPE TYPE: U-BOLT WIDTH: 1.63IN LENGTH: 1.94IN THICKNESS: 1-1/2IN ROPE DIAMETER : 3/8IN MATERIAL: FORGED STEEL SURFACE TREATMENT: GALVANIZED STANDARD: ASME B30.26

FIXING CLAMP FOR LIFTING CABLE; CABLE DIAMETER: 3/16 IN; MATERIAL: GALVANIZED FORGED STEEL; STANDARD FF-C-450 TYPE 1 CLASS 1 MODEL : G-450

WEDGE TERMINAL; CABLE SIZE 1-1/4, 30-32MM MODEL : S421T

SHACKLE; TYPE: ANCLA CON PERNO ROSCADO; MAXIMUM WORK LOAD: 2000 KG; NOMI NAL SIZE: 1/2 IN; SECTION: 1.31X2.31X3.28 IN; MAXIMUM OPENING: 0,81 " CONSTRUCTIVE MATERIAL: FORGED-QUENCHED AND TEMPERED WITH ALLOY PIN; BOLT DIAMETER: 5/8 IN; SECURITY FACTOR 5.44, NORM RR-C-271D TYPE IV, GRADE A, CLASS 2

HOOK; MAXIMUM WORKING LOAD: 12000 LB; MATERIAL: FORGED OR HARDENED AND TEMPERED ALLOY STEEL; TYPE: JAW HOOK; SAFETY COEFFICIENT: 4.5:1; APPLICABLE CHAIN: 1/2"; SWIVEL HOOK WITH BEARINGS; RECESSED TRIGGER DESIGN; SUITABLE FOR FREQUENT ROTATION UNDER LOAD; MANUFACTURER 1: CROSBY; PART N-1: 1004431; MODEL 1: S-13326 S HUR-LOC

HOOK AND EYE TURNBUCKLE; MAXIMUM WORKING LOAD: 182 KG; THREAD DIAMETER: 1/4 "; LENGTH TO BE TENSIONED: 4 "; MATERIAL: FORGED C INCLATED STEEL (GALVANIZED); WITHOUT WELDING; OPEN BOX TYPE; ACCORDING TO FEDERAL STANDARD FF-T791B, TYPE: I, FORM: 1, CLASS: 6; DELIVERY WITH PRODUCT IDENTIFICATION, EMBOSSED (LOGO, SIZE, AND IDENTIFICATION CODE); TEST LOAD: 2.5 TIMES THE LIMITED WORKING LOAD; BREAKING LOAD: 5 TIMES THE WORKING LIMIT LOAD

PRECISION GAUGE OR GAUGE; TYPE: AS POLE CHANNEL GAUGE SET; MEASUREMENT RANGE: FROM 1/4 TO 1-1/2

HOLDING CLAMP FOR LIFT CABLE; CABLE DIAMETER: 5/8 IN; MATERIAL: GALVANIZED FORGED STEEL; MINIMUM QUANTITY