Katalog JAES

DIELECTRIC SOLVENT SRB 1000

BOHLER WELDING ELECTRODE FOX NIBAS 70/20 3.2 300 MM

FAN FOR STANDARD 1.5 HP AND 2 HP MOTOR WITH 17MM MOTOR SHAFT DIAMETER AND 170MM EXTERNAL FAN DIAMETER

TAB B18X11X140

TAB B18X11X56 UNI 6604-69

JOINT TAB B18X11X90 UNI 6604-69

ELASTIC SPINE; NOMINAL DIAMETER: 10 MM; LENGTH: 65MM; DIMENSIONS ACCORDING TO STANDARD: ISO 8752; MATERIAL STANDARD: SPRING STEEL DIN 17225

ELECTRICAL RIG; TYPE: WITH CHAIN; LOAD CAPACITY: 1 TON LIFTING SPEED: 4 M/MIN / 1.2 M/MIN; LIFTING HEIGHT: 3 M; TYPE OF JOB: SEVERE ; CLASSIFICATION: H4 ACCORDING TO HMI STANDARD / 3M ACCORDING TO N FEM STANDARD; CHAIN SAFETY FACTOR: 5:1; LIFTING MOTOR POWER: 1 HP ; TRANSLATION MOTOR POWER ¼ HP ; POWER SUPPLY 3X380-50 HZ; ELECTRICAL CONTROL CIRCUIT POWER SUPPLY: 110V 50 HZ WITH REVERSE CONTACTORS; ELECTRICAL PROTECTION DEGREE (MINIMUM) IP5 5; OVERLOAD LIMIT OF THE MECHANICAL TYPE THAT CUTS THE UPWARD MOVEMENT AT ANY SPEED OF THE RIG; POWER LIMIT: UPPER SHORT SUPPLY VOLTAGE; CHAIN TRAVEL LIMIT: LOWER AND UPPER (ADJUSTABLE AT ANY HEIGHT) ; TRANSLATION TROLLEY: ELECTRIC WITH DISC BRAKE; TRANSLATION SPEED. 10M/MIN; PROVIDED WITH ELECTRICAL PANEL, EMERGENCY STOP BUTTON PANEL, ALLOY STEEL CHAIN WITH ELECTROLYTIC GIN PLATED 1 SHOT AND 360° ROTARY FORGED HOOK

CHECK VALVE - NOMINAL SIZE: 1/2; MOUNTING TYPE: THREADED; FLUIDS: WATER, AIR, OIL. MAXIMUM TEMPERATURE 400 °F (204 °C); WORK POSITION: VERTICAL; BODY MATERIAL: BRONZE; VERTICAL AXIS; GRINDING HARD BRONZE SEAT; FOR 150PSI

TEMPERATURE SWITCH [MSRT150/TERMAN],4NO,0-150CEL,3/4 BSP,IP65,OIL TEMPERATURE,ONE PT100 SENSOR

LABELING TAPE; MODEL : 1181

ADJUSTMENT SCREW/HEAD ROLL

CYLINDER ISOLATOR MK -186-H; MACHINE: LADLE REFINER SYSTEM; DRAWING NUMBER: 187186;8 REV C

CYLINDER ISOLATOR MK -163-D; MACHINE: LADLE REFINER SYSTEM; DRAWING NUMBER: 187163;4

BRUSH HOLDER; FOR CROSS CARRIAGE TROLLEY

LIGHT SCREEN 10MMX30MM

BASE FOR SINGLE FORMERS

RETENTION VALVE

HIDROLIK SILINDIR 1000 PSI HR5FD-2.5X2-N-0.63-2M-N-V-V-1-1-HADAZ6

SAUCER SPRING; OUTSIDE DIAMETER: 25 MM; INTERNAL DIAMETER: 12.2 MM; THICKNESS: 1.5MM; HEIGHT: 2.05MM; STANDARD: EN16983; SPRING WASHER DIN EN 16983 25X12.2MM