دليل السلع Camlogic

LEVEL INDICATOR V.110/220 AC3INOX4/P05AT500

REV COUNTER

CONTROLLAG. DIGITS. WITH BRACKET AND 110 / 220V DRIVE

LIMIT SWITCH GROUP AND TERMINAL BLOCK PFG86

 LEVEL SWITCH

HIGH LEVEL DUST DETECTOR PFG05-M1122-AC4INOX1

LEVEL GAUGE 24VCC 4W

HELIX LEVEL INDICATOR WITH FLANGE POWER SUPPLY 220VAC CONTACTS UP TO 220VAC 10A CONFIGURATION POWER SUPPLY 220 VAC WITH DOUBLE CONTACT UP TO 220 VAC 10A EXTENSION IN ACC. 300 MM STAINLESS STEEL

SENSOR POWDERS

ROTARY PADDLE

INDICATOR, GAUGE

HIGH LEVEL DUST DETECTOR PFG051-GH1NN020005-CHFAP6TF

TURN DETECTOR; ELECTRICAL VOLTAGE: 24 VDC; LEVEL DETECTOR WITH BLADES. 2.1/2" GAS THREADED INSTALLATION. IP65 LUMINUM BOX. STAINLESS STEEL SHAFT AND SPECIAL BEARINGS. POWER SUPPLY: 110/220V 24/48VA 50/60 HZ 24VDC

CAMLOGIC LEVEL SWITCH PFG86/AT FVV110/220 TYPE PFG86/ATF/W110 /220 - LENGTH OF THE FLANGE TO THE PROPELLER END 490 MM

DETECTOR OTHER TYPE; TYPE: MEMBRANE; ELECTRICAL VOLTAGE: 250 V; WITH SILICONE MEMBRANE; MAXIMUM WORKING TEMPERATURE 100 °C; PROTECTION IP55. INVERTER CONTACT OUTPUT WITH CAPACITY OF 15A, 250 V OVER RESISTIVE LOAD; VERTICAL USE OR MAXIMUM INCLINATION OF 45°; ALUMINUM ALLOY CASE; WEIGHT OF 2,700 KG. AMBIENT TEMPERATURE RANGE FROM -10 TO 70°C

LEVEL INDICATOR PFG 86 M RE COG. CAM LOGIC' STORAGE DUST EVACUATION ?

LEVEL CONTROLLER; TYPE: ROTARY; CHARACTERISTICS: FOR PASTY OR SOLID SUBSTANCES, 2 1/2" GAS THREADED CONNECTION, LENGTH 200 MM, OUTPUT 1 INVERTER CONTACT, POWER SUPPLY 110/220 VAC 50/60 HZ AND SINGLE FIN BAND; MANUFACTURER 1: CAMLOGIC; N -PART 1: PFG05 AT D

CAMLOGIC ROTARY LEVEL INDICATOR 0-600° LEVEL INDICATOR; TYPE: ROTARY PADDLE; CONNECTION DIAMETER: 1/2 " D LEVEL SWITCH FOR BULK SOLID MATERIAL AND POWDERS WITH HIGH PERCENTAGE OF HUMIDITY AND STEAM. ROTARY TYPE WITH PROPELLER (AC4INOX1). DOUBLE FLANGE INSTALLATION. IP65 ALUMINUM CASE. STAINLESS STEEL SHAFT AND SPECIAL BEARINGS. POWER SUPPLY 110 AND 220, 1 NO + 1 NC, MAX TEMP 600 ° C; MANUFACTURER 1: CAMLOGIC; PART N-1: PFG05ATFHV601122

LEVEL CONTROLLER; TYPE: ROTARY; FEATURES: FOR PASTE OR SOLID SUBSTANCES, 2 1/2" GAS THREADED CONNECTION, LENGTH 200 MM, 1 INVERTER CONTACT OUTPUT, 110/220 VAC 50/60 HZ POWER SUPPLY AND SINGLE-WAVE PADDLE