فهرسPROTO

FIXED WRENCH; TYPE: FIXED WITH 2 MOUTHS; MINIMUM SIZE: 3/8; MAXIMUM SIZE: 0.438; CHROME VANADIUM STEEL; INCHES

GRIPPER; TYPE: FOR EXTERNAL SEEGER RING; LENGTH: 570MM; HANDLE INSULATION: NOT INSULATED; FOR OPENING LARGE SEEGER RINGS, CAPACITY FOR OUTER DIAMETER WASHERS 252 TO 400 MM, WITH CLOSING MECHANISM, POSSIBILITY OF RELEASE. POWDER LACQUERED BLACK HANDLES

FIXED WRENCH; TYPE: FIXED; MINIMUM SIZE: 1 5/8 IN; MAXIMUM SIZE: 1 3/4 IN FIXED KEY (OPEN; SPANISH; AT BOTH ENDS). ACCORDING TO STANDARDS ISO 691: TOLERANCES - ISO 1085: TWO-ENDED KEYS MEASUREMENTS - ISO 10102: KEYS WITH BOTH OPEN ENDS, LENGTH AND THICKNESS - ISO 3318: TWO-ENDED KEYS, MAXIMUM WIDTH OF THE ENDS

ALLEN KEY; END SIZE (MM/IN): 5/8; LENGTH: REGULAR; FORMAT

OPEN WRENCH SET; TYPE: MILLIMETRIC AUTOCLE; END SIZE (MM/PL G): 3/8; NUMBER OF KEYS: 20; MINIMUM SIZE: 6 MM; MAXIMUM SIZE: 19 MM; 3/8 IN. DRIVE. FROM 6 TO 19 MM (SET OF 20 PIECES)

PROFESSIONAL HEATING GUN; MATERIAL: STEEL; FOR 8-1/2X2 SKELETON TYPE SILICONE

GRIPPER; TYPE: DUCK-BEAK TIP; LENGTH: 180 MM; HANDLE INSULATION: 10000V; BRAND 1: BAHCO; BRAND 2: KNIPEX; BRAND 3: PROTO

FIXED KEY; TYPE: COMBINED; MINIMUM SIZE: 9/16 IN; MAXIMUM SIZE: 9/16 IN

KEYHOLE OR DICE; PROTO 5418 SOCKET, STANDARD, 12 POINTS, 1/2 X 9/16 INCH

ALLEN TYPE KEY; END MEASUREMENT (MM/PLG): 27 MM; LENGTH: NORMAL

IMPACT SOCKET ADAPTER, DRIVE SIZE 3/4INCH, DRIVE TYPE FEMALE, OUTDOOR DRIVE SIZE 1/2INCH, OUTDOOR DRIVE TYPE MALE, OVERALL LENGTH 2-1/16INCH, BLACK OXIDE FINISH, ASME B107.2 STANDARDS

ALLEN TYPE KEY; END MEASUREMENT (MM/PLG): 22 MM; LENGTH: 400MM; T TYPE WRENCH WITH 22 MM ALLEN INSERT, TOOL LENGTH 400 MM, ARM LENGTH 250 MM

INCH ALLEN KEY SET 0 50 TO 1/2

HAND TOOL OTHER TYPE; TYPE: HAND TOOL; MATERIAL: CHROME STEEL; 13 MM COMBINED WRENCH 15° COMPENSATED, REVERSIBLE RATCHET

FIXED KEY; TYPE: COMBINED; MINIMUM SIZE: 9/16 IN; MAXIMUM SIZE: 9/16 IN

HAMMER; TYPE: CUTE; WEIGHT: 2.5 LB; CAPE MATERIAL: FIBERGLASS NON-SLIP HANDLE; WEIGHT: 3.3 LBS; TOTAL LENGTH: 14 INCHES; HEAD MATERIAL: HEAT TREATED STEEL

NON-SPARKING DEAD BLOW HAMMER; WEIGHT: 4 LB; CAPE MATERIAL: FIBERGLASS WITH NON-SLIP HANDLE; NON-SPARKING DEAD BLOW HAMMER; WEIGHT: 4 LB; CAPE MATERIAL: FIBERGLASS WITH NON-SLIP HANDLE; OVERALL LENGTH: 14 - 3/8"; FACE DIAMETER: 2-5/8?; HEAD LENGTH: 5"; HEAD MATERIAL: MOLDED RUBBER, STEEL GRADE INTERIOR

HEX KEY 11/16; FOR IMBUS SCREW

ALLEN KEY; END MEASUREMENT (MM/PLG): 3/8 "; LENGTH: LONG

ALLEN TYPE KEY; END MEASUREMENT (MM/PLG): 14 MM; LENGTH: 278X54MM; B/LONG TYPE L