MỤC LỤC MSA

EYEWASH SHOWER; MATERIAL: AISI 304 STAINLESS STEEL; STRUCTURE BUILT IN AISI 304 STAINLESS STEEL PIPE; SHOWER HOOD WITH A DIAMETER OF 220 MM, BUILT IN STAINLESS STEEL TYPE DILUVIO, WHICH PRODUCES A WATER HOOD WITH A 500 MM DIAMETER RELIEF BAFFLE; EYEWASH BUILT WITH STAINLESS STEEL BASIN OF 250 MM DIAMETER AND SPRINKLERS THAT PRODUCE FOAM WITH JOS AND FACEWASH EFFECT, IT HAS A CALIBRATED STEP WITH PRESSURE AND FLOW REGULATOR; COMES EQUIPPED WITH STAINLESS STEEL LID; EYEWASH COVER THAT OPENS AUTOMATICALLY; SHOWER OPERATION BY STAINLESS STEEL MANUAL LEVER WITH INDICATOR POSTER AND INSTRUCTIONS FOR USE AND STAINLESS STEEL BALL VALVE

GAS ANALYZER; GAS TYPE: CO; ULTIMA X5000 GAS MONITOR FOR THE DETECTION OF TOXIC GASES MODEL : ULTIMA X5000

ACCESSORY FOR SAFETY HELMET; TYPE: VIDEO (SUSPENSION); TYPE: FAST TRAC (RATCHET); 4 POINTS; GRAY; MATERIAL: NYLON

SAFETY HELMET; MATERIAL: MOLDED NYLON, REINFORCED WITH FIBERGLASS; WHITE COLOR; CERTIFICATION: ANSI Z89.1 2003 / NOM-1 15-STPS-1994 / NMX-5-055-SCFI-2002; RESISTANCE: TO IMPACT: 850 ? 1000 POUNDS; TO PENETRATION: 3/8?; DIELECTRIC: 20,000 VOLTS

IACHT09 GAS DETECTOR, FOR HALOGEN, CHLORINE, XCELL, 0-10 PPM, 4-20MA, HART,, SS316 ENCLOSURE, ATEX APPROVED, HOUSING MATERIAL: STAINLESS STEEL, 3/4" NPT, P/N: A-X5000-0-A-1-0-0-31-00-0+2PM+SS- TAG, MANUFACTURER: MSA

IACHS04 CHLORINE SENSOR, FOR X5000, CHLORINE= 31, 0-10 PPM, ATEX, P/N: A-5K-SENS-31-0-A-0-0, MANUFACTURER: MSA

IACHC06 CHLORINE CYLINDER, CL2 IN NITROGEN, 2 PPM, PART NO. 710331, MANUFACTURER: MSA

SAFETY GLASSES; LENS MATERIAL: PLASTIC; EXTREMELY LIGHTWEIGHT, MAXIMUM-FIT SINGLE-LENS SAFETY GLASSES. WIDE AND UNOBSTRUCTED VISION. FITTED AND PERFECT WRAPAROUND PROTECTION AGAINST IMPACTS IN THE EYE AREA

SAFETY HELMET; MATERIAL: MOLDED HIGH DENSITY POLYETHYLENE COLOR: BLUE; CERTIFICATION: ANSI Z89.1 2003 / NOM-115-STPS-1994 / NMX-5-055-SCFI-2002; RESISTANCE: TO IMPACT: 850 ? 1000 POUNDS; TO PENETRATION: 3/8?; DIELECTRIC: 20,000 VOLTS; TO FLAMMABILITY: 3?; WATER ABSORPTION: 5%; SUSPENSION: FAST-TRACK TYPE (MATRACA), INCLUDING THE SWEATBAND. SHOULD PROTECT FROM EXPOSURE TO RADIANT HEAT, HIGH IMPACTS AND HIGH ELECTRICAL VOLTAGES

REPLACEMENT CELL FOR MSA ULTIMA XE HYDROGEN DETECTOR (100% LEL) MSA CODE: A-ULTX-SENS-51-8-0

SAFETY HELMET ACCESSORY; TYPE: ELASTIC MASK WITHOUT CHIN GUARD FOR USE WITH MSA HELMET MODEL V/GARD;MSA; N-PART

MSA AUTOMAXX-AE REGULATOR REF. 10023687 POSITIVE PRESSURE WITH M45X3 THREADED CONNECTION WITH 600MM PIPE

AUTOMAXX REGULATOR INTERFACE FOR AIRMAXX AND AIRGO SELF-BREATHING SYSTEMS COMPATIBLE WITH THE MSA G1 MASK. CODE MSA 10023688

FULL MASK "MSA" G1 -PS-MAXX -SIZE M MASK-HELMET COMBINATION, WITH RUBBER SHOULDER STRAP. APPROVAL: -EN 136 CL3; -EN 137 TYPE 2 (WITH SELF-SPEED AND REGULATOR) -DIN 58610 (HCM) -ATEX APPROVAL (HMC) -CE APPROVAL COD. MSA G1 FP-HM1MHRP.

MSA IGP10-D22R CHECK AND CALIBRATION KIT REPLACEMENT FOR R SENSOR AND DETECT

SENSOR; DETECTOR TYPE: ULTIMA X5000 GAS; ATEX CERTIFICATION; COD 38 CARBON MONOXIDE; DS; FROM 0 TO 1000 PPM. : A-5K-SENS-38-0-A-0-0 ; MODEL: X500 0

AMMONIA SENSOR; DETECTOR TYPE: GAS

ALUMINUM SUPPORT FOR MSA HELMET; CHEMGUARD EC FACE PROTECTOR FRAME FOR USE WITH V-GARD, TOPGARD AND THERMALGARD HELMETS, WITHOUT LOCK DEVICE