MỤC LỤC JAES

CHECK VALVE 2 IN-LINE MOUNTING; TYPE: PISTON; CLASS: PN 16; NOMINAL SIZE: 2 "; MOUNTING TYPE: B SP THREAD ACCORDING TO ISO 228-1; FLUIDS: AGUA, AIRE, ACEITE. MAXIMUM TEMPERATURE 400 °F (204 °C); SHAPE: RECTA; WORKING POSITIONS: VERTICAL; MATERIAL OF THE BODY: BRONZE; RETAINING MECHANISM MATERIAL: BRONZE; MAXIMUM TEMPERATURE 110°C EUROPA SERIES

FILTER, CLASS: FILTER ELEMENT , TYPE: INLINE FILTERS , MEDIA: AIR , LENGTH: 500 MM,

SLUICE OR GATE VALVE; TYPE: ASCENDING STEM; NOMINAL SIZE: 2-1/2"; PRESSURE: CLASS 150; MOUNTING TYPE: RF FLANGED PER ANSI B16.5; FLUIDS: AIR, OIL, WATER AND GAS UP TO 350°F (175°C); BODY MATERIAL : CAST CARBON STEEL; MANUAL OPERATED; BODY MATERIAL STANDARD: ASTM A216 GRADE WCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NRO 8 (13 CR Y HARD FACED); FLEXIBLE WEDGE TYPE; ANSI B16.34 ; DISTANCE BETWEEN FLATS ANSI B16.10; API 598 TESTING STANDARD

IN-LINE MOUNT NON-RETURN VALVE; TYPE: DISC; CLASS: PN 16; NOMINAL SIZE: 1 IN; MOUNTING TYPE: BSP THREAD COMPLIANT WITH ISO 228-2; FLUIDS: WATER, AIR, OIL. MAXIMUM TEMPERATURE 400 ?F (204 ?C); SHAPE: STRAIGHT WORKING POSITION: HORIZONTAL / VERTICAL WITH UPWARD FLOW; MATERIAL L BODY: BRONZE; RETENTION MECHANISM MATERIAL: STAINLESS STEEL NBR SEAT; TEMPERATURE: -20C? AT 100C?; LENGTH 75MM

AIR FILTER VENTILATION SYSTEM; MEASUREMENTS: 32 CMS EXTERNAL DIAM 21 CMS INTERNAL DIAM 66 CMS HEIGHT

FILTERING ELEMENT; ELEMENT BASKET FILTER AIRPEL MODEL OWO 3/4 INCH 300 MESH STAINLESS STEEL PART H 130-3102 ELECTROSTATIC OILER

AIR CONDITIONER; TYPE: SPLIT -COLD/HEAT; ENERGY EFFICIENCY A O A O A O A

HYDRATON AIR OPERATED GAS BOOSTER PUMP.MODEL: GB58S 400 BAR-C

FILTERING ELEMENT; FLUIDS: AIR; SYSTEM BENDIG, PLANARITY METER 10-06IRAA50/1250AA-CPN91108258/FNA

FILTERING ELEMENT; FLUIDS: AIR; COOLER INLET; PLANARITY METER 10-06IRA050-K50A0-CPN9118167/FNA

STANDARD PRESSURE SWITCH; MAXIMUM WORKING PRESSURE: 220 PSIG; MINIMUM DIFFERENTIAL PRESSURE: 20 PSIG; MAXIMUM DIFFERENTIAL PRESSURE: 51 PSIG; TYPE OF FLUIDS: AIR; TYPE: SPRING WITH PLATINUMS; PRESSURE SWITCH FOR AIR COMPRESSOR - 7.5HP THREE-PHASE MOTOR - THE PRESSURE SWITCH IS SPRING WITH PLATINUM PLATINUMS

BALL VALVE; NOMINAL SIZE: 3/4 IN MOUNTING TYPE: NPT THREADED PER ANSI B1.20.1; FLUIDS: AIR, WATER, OIL, GAS. TEMPERATURE RANGE FROM -20 °C TO +260 °C DIAL MATERIAL: BRONZE; BODY MATERIAL: CAST BRONZE PITCH TYPE: TOTAL; PRESSURE: 600 WOG

CLAMP; CLAMP REPAIR; DIAMETER 4 "; SPLIT SLEEVE TYPE PLIDCO SS00400

COMPLETE FILTER; CONNECTION DIAMETER: 3/8 IN; MAXIMUM OPERATING PRESSURE : 1 BAR; FILTRATE LEVEL: 10 MICRO M; FLUIDS: AIR; ME-5917 1/2 REV C ITEM30

EBT DOOR; MACHINE: EAF OVEN; A) LARGE LID AND SMALL LID PLATES, 1.1/2" THICK, ASTM-A36 CARBON STEEL. B) LARGE LID COIL IN DIÁ TUBE. 1.1/2", CÉD. 80, IN ASTM-A106B STEEL. C) SMALL CAP COIL IN DIÁ TUBE. 1.1/2", CÉD. 80, IN ASTM-A106B STEEL. D) TUBE FOR DAY AIR. 1/2", CÉD. 80, IN ASTM-A106B STEEL. E) SAE-62 BRONZE BUSHINGS. F) ARROW IN HOLLOW BAR SAE-1518. G) SAE-1018 STEEL BOLTS. H) EXTERIOR SUPPORT PLATES IN ASTM-A36 STEEL. I) 2 DEUBLIN BRAND ROTARY JOINTS, NO. FROM PART 557-000-001, DIÁ. 1.1/2" NPT THREAD. J) BAR FOR SEALING BETWEEN TUBES, DI. 5/8", IN SAE-1018 STEEL. K) COPLES DAY. 1" AND ELBOWS DAY. 1.1/2", IN CARBON STEEL ASTM-A105 AND A234WPB

QUICK ACTION VALVE NOMINAL SIZE: 1-1/4 "; PRESSURE: 3000 PSI; MOUNTING TYPE: NPT THREADED ACCORDING TO ANSI B1.20.1; FLUIDS: AIR, WATER, OIL, GAS. TEMPERATURE RANGE UP TO +225 °C; DIAL MATERIAL: CARBON STEEL; BODY MATERIAL: FORGED CARBON STEEL; STEP TYPE: NOMINAL

GLOBE VALVE; NOMINAL SIZE: 3 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C) BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; ASCENDING STEM; BODY MATERIAL STANDARD: ASTM A21 6 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NO. 8 (13 C R Y HARDFACED); GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1873; CLASS (PRESSURE-TEMPERATURE) ANSI B16.34; DISTANCE BETWEEN FACES AN SI B16.10; STANDARD FOR TESTING API 598; THE VALVE MUST BE PROVIDED WITH A LOCKING DEVICE SUITABLE FOR USING A PADLOCK WITH A N OMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

LOCK OR GATE VALVE; TYPE: ASCENDING STEM; NOMINAL SIZE: 6 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C); BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; BODY MATERIAL STANDARD: ASTM A216 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NRO 8 (13 CR AND HARDFACED); FLEXIBLE CRADLE TYPE; GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1414; CLASS (PRESSURE-TEMPERATUR A) ANSI B16.34; DISTANCE BETWEEN FACES ANSI B16.10; STANDARD FOR TESTING AP I 598; THE VALVE MUST BE PROVIDED WITH THE PTO LOCKING DEVICE TO USE PADLOCK WITH NOMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

IN-LINE MOUNT NON-RETURN VALVE; TYPE: CLAPPER; CLASS: CLASS 150 NOMINAL SIZE: 2 IN; MOUNTING TYPE: BSPT THREADED ACCORDING TO DIN 2999; FLUI TWO: WATER, AIR, OIL. MAXIMUM TEMPERATURE 400°F (204°C); SHAPE: STRAIGHT; WORKING POSITION: HORIZONTAL / VERTICAL WITH UPWARD FLOW; BODY MATERIAL: BRONZE; RETENTION MECHANISM MATERIAL: BRONZE; DIMENSIONS ACCORDING TO STANDARD: MSS-SP-80; BODY AND LID MATERIAL: BRONZE ASTM B 62; RETENTION MECHANISM: CLAPPER; CONSTRUCTION FORM: STRAIGHT TYPE 3 SE GUN MSS-SP-80; CLAPPER MATERIAL: BRONZE; SEAT MATERIAL: BRO NCE; CLASS 150 ;WORK POSITION: HORIZONTAL; DESIGN STANDARD FOR BRONZE VALVES, WALL THICKNESS AND CLASSES (PRESSURE/TEMPERATURE) ACCORDING TO MSS-SP-80; STANDARD FOR TESTING API 598; BSPT THREADED ENDS

PNEUMATIC PAINTING GUN AND TORCH; SUPPORT TYPE: PORTABLE; TANK VOLUME: 400 CM3; ANTIGRAVITY PAINT GUN; AIR, FLUID AND FAN FLOW REGULATORS; WITH ANTI-DRIP AND PRODUCT FILTER; 1.5MM NOZZLE; AIR CONSUMPTION 40 PSI ; AIR INLET 1/4" NPT MALE; CUP CAPACITY 400CC