Catalog PARKER

MALE NPTF-JIC 37°; TUBE EXTERNAL DIAMETER: 3/4 IN; THREAD TYPE L1: NPTF 1/2-14; THREAD TYPE L2: SAE JIC 37° 1 1/16-12; MATERIAL: CARBON STEEL; DIMENSIONS BY NORM: SAE 070102; EXTERNAL PIPE/37° FLARE ; MODEL 1: 0103-8 -12

O-RING; DIAMETRO INTERIOR: 2-1/2; DIAMETRO EXTERIOR: 2-7/8; ESPESOR: 3/16; MATERIAL: VITON; DUREZA SHORE: V0894-90

1/2 CRIMP HOSE FITTING HOSE TO FEMALE PIPE, SWIVEL

ELBOW; ANGLE: 90; TUBE OUTSIDE DIAMETER: 1/4 IN; THREAD TYPE L1: 1/8 - 27 NPTF; THREAD TYPE L2: 7/16 - 20; MATERIAL: CARBON STEEL; DIMENSIONS ACCORDING TO STANDARD: SAE 070202; EXTERNAL PIPE/37° FLARE

FLOW CONTROL VALVE

PROPORTIONAL AND SERVO VALVE; MAXIMUM OPERATING PRESSURE: 105 BAR; ASSEMBLY TYPE: PLACA; FLUIDS: OIL; VOLTAGE: 24 V; MANUFACTURER: PARKER; PART-NO: 4VP01-20-G24-B1-C1; MODEL: S26-58441-H

HYDRAULIC CYLINDER

HYDRAULIC CYLINDER; TYPE: TIE ROD; PISTON SIZE: 5; RACE: 12; STEM: 2; ANCHORAGE: MF1, FRONT RECTANGULAR FLANGE; MAXIMUM WORKING PRESSURE: 2200 PSI; FLUIDS: OIL; EFFECT TYPE: DOUBLE; 2H SERIES, 1 1/2" THREAD 12 THREADS/INCH J TYPE MOUNTING 5.00J2HLUV14A12.000

FILTER ELEMENT; FILTRATE LEVEL: 5 MICRON; FLUIDS: MINERAL AND PETROLEUM BASED FLUID; MATERIAL: CARTRIDGE; FOR USE WITH FILTER HOUSING SERIES 50P-1/50PR-1

CHECK VALVE; NOMINAL SIZE: 1"; MAXIMUM OPERATING PRESSURE: 5075 PSI; ASSEMBLY TYPE: FLANGE; FLUIDS: OIL; MANUFACTURER: PARKER; PART NUMBER: C5V08 310 B1

VALVE

SIMPLE SOLENOID VALVE; NOMINAL SIZE: 3/4 IN; MAXIMUM OPERATING PRESSURE: 40 PSI / 150 PSI; FLUIDS: WATER, AIR, INERT GAS; ASSEMBLY TYPE: 8D; NUM BER OF WAYS/POSITIONS: 2; OPERATION TYPE: ELECTRICAL; VOLTAGE: 24 / 110 / 120 VAC; FREQUENCY: 50 / 60 HZ; BODY MATERIAL: BRASS; ORIFICE SIZE: 3/4; CV FLOW FACTOR: 5; TEMPERATURE: 180 F (AC), 150 F (DC) 24VDC SOLENOID

PNEUMATIC CYLINDER; TYPE: TIE ROD; EFFECT TYPE: DOUBLE; SPECS: NFPA; PARKER AIR CYLINDER, P1D-G040MCE0150NNNN, LOD SEA TEST HEAD PNEUMATIC CYLINDER P1D-G040MCE0150NNNN

ADAPTER; TYPE: STRAIGHT JIC 37°; OUTER TUBE DIAMETER: 1/2 IN; THREAD TYPE L1: 3/4; - 16; L2 THREAD TYPE: 3/4; - 16; MATERIAL: CARBON STEEL; DIMENSIONS ACCORDING TO STANDARD: SAE 070101; UNION 37° FLARE/37° FLARE

O-RING; INTERNAL DIAMETER: 44.04 MM; OUTER DIAMETER: 51.1 MM; THICKNESS: 3.53 MM; MATERIAL: NITRILE BUTADIENE-NBR; SHORE HARDNESS: SHORE 70 "A" ±5 MARKS 2 AND 3 ONLY FOR HC01, SS01, S010, SC01, SE01, SF01 AND SH01 / ACCORDING TO ASTM D2000-70B STANDARD. CLASSIFICATION 3CH720-A25 B14 E16 E36. CHARACTERISTICS AND TESTS: ACCORDING TO IRAM STANDARDS 113082 AND 113087. NOTE: APPLICATIONS: STATIC AND DYNAMIC USE OF PASSING; HYDRAULIC OR PNEUMATIC FOR COMPRESSED AIR. MINERALS, DERIVATIVES OF PETROLEUM, WATER AND FREON 12 DIMENSIONAL STANDARD L SAE AS 568/ISO 3601-1; IDENTIFICATION ACCORDING TO ASTM D2000/SAE J200 STANDARD; BLACK COLOR; TEMPERATURE RANGE FROM -55 TO 100°C; TOLERANCE ACCORDING TO DIN 3771/ISO 3601

ADAPTER; TYPE: ELBOW 90° MALE JIC X NPTF; ANGLE: 90°; OUTER TUBE DIAMETER: 1/4; THREAD TYPE L1: 1/4; JIC MALE; L2 THREAD TYPE: ¼" NPT; MATERIAL: 316 STAINLESS STEEL; DIMENSIONS ACCORDING TO STANDARD: SAE J514; NOMINAL PRESSURE: 6000 PSI; TRIPLE-LOK SERIES

ADAPTER; TYPE: STRAIGHT MALE X MALE ADAPTER; ANGLE: 0; OUTER DIAMETER TUBE: 1/4; THREAD TYPE L1: 1/4; JIC MALE; L2 THREAD TYPE: 1/4 - 19 BSPP; MATERIAL: AC INOX; DIMENSIONS ACCORDING TO STANDARD: SAE J514; NOMINAL PRESSURE: 4500 PSI; TRIPLE-LOK SERIES

MOTOR

CONNECTION; CONNECTION TYPE: TO WELD; OUTER DIAMETER TUBE: 30 MM THREAD TYPE: M42X2; MATERIAL: STAINLESS STEEL; WELDING TIP WITH 24° O-RING, WITH 24° EO CONE END NUT; MATERIAL STAINLESS STEEL BLE (1.4571); VITON SEALS SKA30X5-71VIT + M30SEODURX MODEL: ERMETO

ADAPTER; TYPE: MALE PLUG; OUTER TUBE DIAMETER: 1/4 IN; THREAD TYPE L1: 7/16 - 20; MATERIAL: CARBON STEEL; DIMENSIONS ACCORDING TO STANDARD: SA E 070109; NOMINAL PRESSURE: 380 BAR; 37° FLARE PLUG