Catalog BELIMO

MOTOR

SERVO-CONTROLS

ACTUATOR: AFB24 SPRING RETURN ACTUATOR, 180IN-LB, ON/OFF, 24V

ACTUATOR: AFB24-MFT SPRING RETURN ACTUATOR, 180IN-LB, MFT, 24VOLT

ACTUATOR: AFB24-MFT-S SPRING RETURN ACTUATOR, 180IN-LB, MFT, 24V, SWITCH

ACTUATOR: AFB24-MFT95 SPRING RETURN ACTUATOR, 180IN-LB, 0-135Ω, 24V

SPRING: AFB24-PC SPRING RETURN, 180IN-LB, PHASE CUT, 24V

ACTUATOR: AFB24-S SPRING RETURN ACTUATOR, 180IN-LB, ON/OFF, 24V, SWITCH

SPRING: AFB24-SR SPRING RETURN, 180IN-LB, 2-10V, 24V

DAMPER ACTUATOR: BELIMO AFB24-SR-S MODULATING DAMPER ACTUATOR, SPRING RETURN, REVERSABLE WITH CW/CCW MOUNTING

SPRING: AFBUP SPRING RETURN, 180IN-LB, ON/OFF, UP

ACTUATOR SPRING: AFBUP-S ACTUATOR SPRING RETURN, 180IN-LB, ON/OFF, UP, SWITCH

ACTUATOR: AFRX24-MFT 270 IN-LB, MULTI-FUNCTION TECHNOLOGY, DC SPRING RETURN ACTUATOR

OVERLOAD: FOR ON/OFF AND FLOATING POINT CONTROL OF DAMPERS IN HVAC SYSTEMS. ACTUATOR SIZING SHOULD BE DONE IN ACCORDANCE WITH THE DAMPER MANUFACTURERS SPECIFICATIONS. OPERATION: ACTUATOR IS NOT PROVIDED WITH AND DOES NOT REQUIRE ANY LIMIT SWITCHES, BUT IS ELECTRONICALLY PROTECTED AGAINST OVERLOAD. ANTI-ROTATION STRAP SUPPLIED WITH ACTUATOR WILL PREVENT LATERAL MOVEMENT. AHB24…-100 PROVIDES 4 IN [100 MM] OF LINEAR STROKE. STROKE OF GEAR RACK CAN BE ADJUSTED ON BOTH SIDES IN INCREMENTS OF 0.8 IN [20 MM] BY MEANS OF MECHANICAL END STOPS. WHEN REACHING DAMPER OR ACTUATOR END POSITION, ACTUATOR AUTOMATICALLY STOPS. GEARS CAN BE MANUALLY DISENGAGED WITH A BUTTON ON ACTUATOR COVER. AHB24-3… ACTUATORS USE A SENSORLESS BRUSHLESS DC MOTOR, WHICH IS CONTROLLED BY AN APPLICATION SPECIFIC INTEGRATED CIRCUIT (ASIC). ASIC MONITORS AND CONTROLS THE ACTUATORS ROTATION AND PROVIDES A DIGITAL ROTATION SENSING (DRS) FUNCTION TO PREVENT DAMAGE TO ACTUATOR IN A STALL

OVERLOAD: FOR ON/OFF AND FLOATING POINT CONTROL OF DAMPERS IN HVAC SYSTEMS. ACTUATOR SIZING SHOULD BE DONE IN ACCORDANCE WITH THE DAMPER MANUFACTURERS SPECIFICATIONS. OPERATION: ACTUATOR IS NOT PROVIDED WITH AND DOES NOT REQUIRE ANY LIMIT SWITCHES, BUT IS ELECTRONICALLY PROTECTED AGAINST OVERLOAD. ANTI-ROTATION STRAP SUPPLIED WITH ACTUATOR WILL PREVENT LATERAL MOVEMENT. AHB24…-200 PROVIDES 8 IN [200 MM] OF LINEAR STROKE. STROKE OF GEAR RACK CAN BE ADJUSTED ON BOTH SIDES IN INCREMENTS OF 0.8 IN [20 MM] BY MEANS OF MECHANICAL END STOPS. WHEN REACHING DAMPER OR ACTUATOR END POSITION, ACTUATOR AUTOMATICALLY STOPS. GEARS CAN BE MANUALLY DISENGAGED WITH A BUTTON ON ACTUATOR COVER. AHB24-3… ACTUATORS USE A SENSORLESS BRUSHLESS DC MOTOR, WHICH IS CONTROLLED BY AN APPLICATION SPECIFIC INTEGRATED CIRCUIT (ASIC). ASIC MONITORS AND CONTROLS THE ACTUATORS ROTATION AND PROVIDES A DIGITAL ROTATION SENSING (DRS) FUNCTION TO PREVENT DAMAGE TO ACTUATOR IN A STALL

POSITIONER: FOR PROPORTIONAL MODULATION OF DAMPERS IN HVAC SYSTEMS. ACTUATOR SIZING SHOULD BE DONE IN ACCORDANCE WITH THE DAMPER MANUFACTURERS SPECIFICATIONS.

POSITIONER: FOR PROPORTIONAL MODULATION OF DAMPERS IN HVAC SYSTEMS. ACTUATOR SIZING SHOULD BE DONE IN ACCORDANCE WITH THE DAMPER MANUFACTURERS SPECIFICATIONS.

MOUNTING BRACKET: FOR ON/OFF AND FLOATING POINT CONTROL OF DAMPERS IN HVAC SYSTEMS. ACTUATOR SIZING SHOULD BE DONE IN ACCORDANCE WITH THE DAMPER MANUFACTURERS SPECIFICATIONS. ACTUATOR IS MOUNTED DIRECTLY TO A DAMPER SHAFT UP TO 1.05” IN DIAMETER BY MEANS OF ITS UNIVERSAL CLAMP, SELF-CENTERED DEFAULT.

MOUNTING BRACKET: FOR ON/OFF AND FLOATING POINT CONTROL OF DAMPERS IN HVAC SYSTEMS. ACTUATOR SIZING SHOULD BE DONE IN ACCORDANCE WITH THE DAMPER MANUFACTURERS SPECIFICATIONS. ACTUATOR IS MOUNTED DIRECTLY TO A DAMPER SHAFT UP TO 1.05” IN DIAMETER BY MEANS OF ITS UNIVERSAL CLAMP, SELF-CENTERED DEFAULT.

CONTROL: AMB24-MFT PROPORTIONAL CONTROL, NON-SPRING RETURN, DIRECT COUPLED, 24V, MULTI-FUNCTION TECHNOLOGY.