Catálogo JAES

THREADED COUPLING; NOMINAL DIAMETER: 1/2 IN; NOMINAL THREAD DIAMETER: 1/2 IN; THREAD TYPE: NPT; MAXIMUM WORKING PRESSURE: 3000 PSI; MATERIAL: 304 L STAINLESS STEEL; STANDARD/SPECIFICATION/DRAWING

PLUG - TYPE: MALE THREADED HEXAGONAL HEAD; NOMINAL THREAD DIAMETER: 3/4; THREAD TYPE: MNPT 3/4-14; MAXIMUM WORKING PRESSURE: 3000 PSI; MATERIAL: ASTM A105 GRADE 2 FORGED STEEL; DIMENSIONS S/STANDARD: ANSI B16.11

O-RING; INTERIOR DIAMETER: 32.5 MM; OUTER DIAMETER: 39.1 MM; THICKNESS: 3.55MM; MATERIAL: VITON; SHORE HARDNESS: 70 SHORE A

ALUMINUM EXPLOSION PROOF THERMOCOUPLE HEAD, PROVIDED WITH FM/CSA CERTIFICATION, NEMA 4X IP66/68 RATING. THE CONNECTION HEAD ACCOMMODATES AN ELLIPTICAL BLOCK OR TRANSMITTER 2? (50MM) IN DIAMETER. MARQUE PUSHNA

HOLD; INTERIOR DIAMETER: 240 MM; OUTER DIAMETER: 270 MM; THICKNESS/LENGTH: 15 MM; PROFILE TYPE: SINGLE LIP; FLUIDS: GREASE; MATERIAL: NITRILE; SHORE HARDNESS: 80 A; MAXIMUM WORKING PRESSURE: 7 PSI; TEMPERATURE RANGE: - 40 - 93 °C

SEAL FOR ROTARY SHAFT; TYPE: DOUBLE LIP WITH SPRING REINFORCED METAL CASE; MATERIAL: VITON; SHAFT DIAMETER: 150 MM; HOUSING DIAMETER: 225 MM; THICKNESS: 15MM; SHORE HARDNESS: 75 A; FLUIDS: OIL; TEMPERATURE RANGE: -25°C TO +220°C; MANUFACTURING STANDARD: ISO 6194 / DIN 3760

PE100 HDPE PIPE - SDR: 17 - NOMINAL PRESSURE: 10 BAR - OUTER DIAMETER: 450 MM ACCORDING TO ISO 4427 STANDARD - IN 12 METER SECTIONS.

HEXAGONAL BOLT NOMINAL THREAD DIAMETER: 3/8 "; THREAD TYPE: UNC; LENGTH: 3-1/2 "; SCREW STANDARD: ANSI B.1. 1; MATERIAL: A37 - ST37; TYPES OF MECHANICAL PROPERTIES: GRADE 8.8

POLYETHYLENE OR PLASTIC BOTTLE; APPLICATION: OIL SAMPLING FOR RICH LUB ANALYSIS; CAPACITY FROM 100 TO 130 ML (4 TO 5 OUNCES), THREAD DIAMETER ON THE LID 38 MM, MAXIMUM OUTER DIAMETER 53 MM, MINIMUM THICKNESS OF PAIR ED 0.8 MM. INCLUDES THE LID, THEY MUST BE SUPPLIED CLOSED, FREE OF PLASTIC BURRS AND/OR IMPURITIES, CLEAN - LESS THAN 100 PARTICLES >10 MICRONS/ML

COUPLING OUTSIDE DIAMETER: 2-5/8IN LENGTH: 3-1/2IN MATERIAL: TGP STEEL

O-RING; INTERNAL DIAMETER: 320 MM; OUTSIDE DIAMETER: 334 MM; THICKNESS: 6.99 MM; MATERIAL: FPM 70 A; SHORE HARDNESS: 70 A; DRAWING NUMBER: V0149 9

O-RING; INTERNAL DIAMETER: 316 MM; OUTSIDE DIAMETER: 330 MM; THICKNESS: 6.99 MM; MATERIAL: FPM 70; SHORE HARDNESS: 70

O-RING; INTERNAL DIAMETER: 417 MM; OUTSIDE DIAMETER: 427.66 MM; THICKNES S: 5.33 MM; MATERIAL: VITON; SHORE HARDNESS: 70A

GEAR COUPLING; TYPE: TOOTHED-TOOTHED; INTERNAL DIAMETER-CUBE 1: 0 MM; INTERNAL DIAMETER-CUBE 2: 0 MM; TORQUE

HAND TOOL OTHER TYPE; TYPE: MILLIMETER; MATERIAL: M12 INSERT, 12MM X 1.75; INSER TO 12MM STEP 1.75, SET WITH

ELASTIC SAFETY RINGS; TYPE: INTERNAL; OUTER DIAMETER: 82.5 MM; INTERNAL DIAMETER NO: 78 MM; THICKNESS: 2.5

WELDED LINK CHAIN; CHAIN DIAMETER: 16 MM; SIDE LENGTH OF THE BALL: 58 MM; WIDTH OF THE INTERIOR OF THE BALL: 22 MM;

SEAL FOR ROTARY SHAFT; SHAFT DIAMETER: 6"; HOUSING DIAMETER: 4.25"; THICKNESS: .3125 "; FLUIDS: OIL; MANUFACTURING STANDARD: RMA; INSULATOR(BEARING RETAINER) OD=6"/ID=4.25/W=.31/REAR/G10

RETAINER FOR ROTARY AXIS; TYPE: SINGLE LIP WITH METALLIC INSERT WITH ROCK; MATERIAL: MILL RIGHT N NITRILE; SHAFT DIAMETER: 90 MM; HOUSING DIAMETER: 110 MM; THICKNESS: 12MM; SHORE HARDNESS: 75; FLUIDS: OIL AND ISO HM32; TEMPERATURE RANGE: -20 TO 90°C; MAXIMUM PRESSURE: 0.5 BAR; MANUFACTURING STANDARD: ISO 6194 / DIN 3760

TYPE S COMPENSATED CABLE TYPE: FOR S THERMOCUPLES; SECTION: 1.35 MM2 NUMBER OF PAIRS: 1; NUMBER OF THREADS: 19; INSULATION CLASS: SILI CONADA RUBBER; SHEATH MATERIAL: KEBLAR ADAMIRIC FIBER, TIN-PLATED COPPER MESH; GAUGE: AWG 16; DIAMETER OF THE THREADS 0.30 MM, ALTER NATIVE FORMATION 43 THREADS OF DIAMETER 0.20 MM